I am trying to get the bios settings correct for my pc. I can get it to boot in auto mode, but when I set the bus speeds and such to what I think they should be, the computer will not start. The cpu is an Athlon 3000+, which should have a bus speed of 166 and a clock multiplier of 13. The memory is pc3200. I have the following set in the bios: CPU Frequency Mode: 166MHz DRAM Clock: 166MHz CPU Ratio Select: 13 I have also tried going in to the manual mode for the CPU Frequency Mode, and tried these settings: Frequency 1MHz Stepping: 166MHz CPU to PCI Divider: /5 DRAM:AGP:PCI Clock: 166:66:33 DRAM Clock: 166MHz CPU Ratio Select: 13x I have also tried the above with DRAM Clock set to : By Speed The memory should go up to 200MHz, but I would like to just get the computer to boot with the proper processor speed first. What am I doing wrong? I would like to get this working. Thanks!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date Get the Free Trial http://ad.doubleclick.net/clk;207172674;29440083;f Archive: http://www.houseoffusion.com/groups/cf-community/message.cfm/messageid:275777 Subscription: http://www.houseoffusion.com/groups/cf-community/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.5
