Concur, Seth and Randy. When I was analyzing CF applicability for Marinexplore, I wanted to choose the most advanced _finalized_ spec I could. (Because we wouldn't want to publish data files that became invalid due to a change.) Although 1.6 wasn't finalized, it had been around for so long and was so vastly improved over 1.5 that I decided to go with it -- not realizing the predecessors were never finalized either.
My conclusion: To be consistent with common practice, a spec should stay beta until it is finalized. I don't see the problem with a spec being released that incorporates a mistake. ("I think there is a good argument that we should try hard to avoid making a mistake which we have to reverse, because data lasts forever, and if data were written with a flawed standard, it would forever be a nuisance.") All the data ever written has loads of mistakes, including sloppy adherence to specs, and no spec is perfect either. (Plus, an awful lot of data does not last forever, sorry to say.) The point is, if the data conforms to its stated specification, we know what to expect, and that is by far the greatest accomplishment. Let's not let fear of a mistake slow down progress, especially when our collective good judgment will prevent most mistakes anyway. My conclusion: Yes try hard to identify issues during discussion of changes, even do some test cases -- but don't arbitrarily extend the beta period just to identify more issues. When you have a coherent update that you believe is consistent, release it, and let's move forward from there. John On Mar 18, 2014, at 10:30, Seth McGinnis <mcgin...@ucar.edu> wrote: > Hi all, > > I have to agree with Randy. When you're producing data, you generally > don't have time to wait for the standard to stabilize, you just do your > best to find whatever elements of CF are a decent match to the problem > at hand and use them, regardless of whether or not they might be marked > 'provisional'. (Or even whether they've moved from being accepted in > online discussion to being written down in an official version of the > spec document...) > > And, to be honest, data that's invalid because of sloppy adherence to > the spec is far, far more of a nuisance than data that's been > invalidated by the spec moving out from under it will ever be. If > you've got a system for dealing with the former, it can handle the > latter, too. > > Cheers, > > --Seth > > > On 3/18/14 7:36 AM, rho...@excaliburlabs.com wrote: >> Dear Jonathan et al: >> >> a data point .... >> >> As an engineer working an operational data production system with >> schedules and deadlines, and the requirement to use NetCDF file format >> we are leveraging CF conventions wherever consensus has been reached. >> >> The benefit of using these conventions (regardless of their provisional >> status) outweighs any risk of their retraction. >> >> I am curious what other folks working operational data production >> systems are doing in this regard. >> >> very respectfully, >> >> randy >> >> >> >> ------------------------------------------------------------------------ >> *From*: "Jonathan Gregory" <j.m.greg...@reading.ac.uk> >> *Sent*: Tuesday, March 18, 2014 7:09 AM >> *To*: cf-metadata@cgd.ucar.edu >> *Subject*: Re: [CF-metadata] Editing/publishing workflow >> >> Dear Richard >> >> That's right. No change since 1.0 has so far passed beyond being >> "provisional" >> since we didn't definitely agree how to do that. I am not strongly in >> favour of >> provisional status myself, but others have argued strongly for it >> previously. >> I think there is a good argument that we should try hard to avoid making a >> mistake which we have to reverse, because data lasts forever, and if >> data were >> written with a flawed standard, it would forever be a nuisance. Of course in >> principle this can be detected and perhaps worked round using the >> version from >> the Conventions attribute, but in practice I suspect this attribute is not >> normally written scrupulously correctly, nor inspected by analysis software. >> So we should be careful, and that means a "cooling-off" period during which >> data is at risk of being invalidated if it uses a provisional convention >> is a >> reasonable safeguard, but it should not be a long period - months, not >> years, >> I would say. >> >> Best wishes >> >> Jonathan >> >> ----- Forwarded message from "Hattersley, Richard" >> <richard.hatters...@metoffice.gov.uk> ----- >> >>> Date: Tue, 18 Mar 2014 09:05:36 +0000 >>> From: "Hattersley, Richard" <richard.hatters...@metoffice.gov.uk> >>> To: "Gregory, Jonathan" <j.m.greg...@reading.ac.uk>, >>> "cf-metadata@cgd.ucar.edu" <cf-metadata@cgd.ucar.edu> >>> Subject: RE: [CF-metadata] Editing/publishing workflow >>> >>>> I'd like to propose changing the rules. That's something the conventions >>>> committee can agree, I believe. I would suggest the simplest possibility, >>>> if we wish to retain provisional status, is to specify a time. We could >>>> say that, after one year from acceptance or when the next version of the >>>> conventions document is published, whichever is later, a change becomes >>>> permanent. What do you think? >>> >>> The more I consider the concept of "provisional status" the more it >>> concerns me. What does it actually mean for a netCDF file to use a >>> particular "Conventions" attribute value? How can one tell what is still in >>> provisional status? What version should data writers be using? I've checked >>> back through 1.3, 1.4, 1.5, and 1.6 and they all still contain sections >>> marked as provisional. Using the analogy to software versions that has been >>> raised elsewhere, the CF convention versions are essentially pre-release >>> versions, e.g. 1.6-beta, and are not suitable for production use. >>> >>> I would argue that the simplest possibility is to drop the "provisional >>> status" concept. Identifying and resolving problems should happen during >>> the discussion of the modification and its subsequent application to the >>> conventions document. >>> >>> If a further flaw, ambiguity, etc. is subsequently discovered prior to the >>> publication of the next version of the conventions then it can easily be >>> resolved at that time. >>> >>> If a problem is discovered after the publication of the next version then a >>> correction must be applied and published in a *new* version. That version >>> could be a "bug fix" version (e.g. 1.6.1) or it could just wait for the >>> next normal release, e.g. 1.7. It would help to agree that process in >>> advance but I have no strong opinion either way. >>> >>> >>> Richard Hattersley >>> Expert Software Developer >>> Met Office FitzRoy Road Exeter Devon EX1 3PB United Kingdom >>> Tel: +44 (0)1392 885702 >>> Email: richard.hatters...@metoffice.gov.uk Web: www.metoffice.gov.uk >>> >>> -----Original Message----- >>> From: CF-metadata [mailto:cf-metadata-boun...@cgd.ucar.edu] On Behalf Of >>> Jonathan Gregory >>> Sent: 13 March 2014 17:24 >>> To: cf-metadata@cgd.ucar.edu >>> Subject: Re: [CF-metadata] Editing/publishing workflow >>> >>> Dear Jeff >>> >>>> Present CF Conventions policies require that all changes be >>>> provisional, and marked as such in the document, until determined to >>>> be permanent at a later time (this determination has never been made). >>>> That's the meaning of all the pink and yellow highlighting in the >>>> document at cf-pcmdi.llnl.gov. >>> >>> Yes, this is a issue. As Richard said, it doesn't matter how it is marked. >>> The problem is that all changes, however old, are still marked as >>> provisional, as you said. This is (a) a bit silly and (b) a nuisance as >>> regards legibility of the doc. The aim of provisional status was to allow >>> time for people to try out the change, in case a logical flaw was >>> discovered which hadn't been fore- seen at the time of the proposal. This >>> was because of the concern that many or most proposals concern data which >>> has not yet been written, so the metadata being proposed can't have been >>> thoroughly tested. It was supposed that some tests, using specified >>> software, would be used to demonstrate the new feature was "working", but >>> no-one had time to work out the details for this. >>> >>> I'd like to propose changing the rules. That's something the conventions >>> committee can agree, I believe. I would suggest the simplest possibility, >>> if we wish to retain provisional status, is to specify a time. We could say >>> that, after one year from acceptance or when the next version of the >>> conventions document is published, whichever is later, a change becomes >>> permanent. What do you think? >>> >>> Cheers >>> >>> Jonathan >>> _______________________________________________ >>> CF-metadata mailing list >>> CF-metadata@cgd.ucar.edu >>> http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata >> >> ----- End forwarded message ----- >> _______________________________________________ >> CF-metadata mailing list >> CF-metadata@cgd.ucar.edu >> http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata >> >> >> >> _______________________________________________ >> CF-metadata mailing list >> CF-metadata@cgd.ucar.edu >> http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata >> > _______________________________________________ > CF-metadata mailing list > CF-metadata@cgd.ucar.edu > http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata John Graybeal jbgrayb...@mindspring.com _______________________________________________ CF-metadata mailing list CF-metadata@cgd.ucar.edu http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata