Dear Martin, Excellent! Thank you.
These two names are accepted for publication in the standard name table and will be added in the next update (version 57, not 56 that will be published later today). Best wishes, Alison ------ Alison Pamment Tel: +44 1235 778065 NCAS/Centre for Environmental Data Archival Email: alison.pamm...@stfc.ac.uk STFC Rutherford Appleton Laboratory R25, 2.22 Harwell Oxford, Didcot, OX11 0QX, U.K. From: Juckes, Martin (STFC,RAL,RALSP) Sent: 04 July 2018 10:16 To: Pamment, Alison (STFC,RAL,RALSP) <alison.pamm...@stfc.ac.uk> Subject: Re: [CF-metadata] Precipitation fractions for LS3MIP Dear Alison, thanks, the new definitions are very clear, regards, Martin ________________________________________ From: Pamment, Alison (STFC,RAL,RALSP) Sent: 04 July 2018 09:51 To: Juckes, Martin (STFC,RAL,RALSP) Subject: Re: [CF-metadata] Precipitation fractions for LS3MIP Dear Martin, I borrowed the text about horizontal domain from names such as sea_ice_mass and sea_ice_area where it indicates the area of the whole grid cell. As you have pointed out, the denominator may not be the entire grid cell, so a cell_methods attribute would have to be supplied to indicate how the fraction was calculated. I have amended the definitions, this time borrowing text from the definition of precipitation_flux_onto_canopy, which is perhaps more similar to the proposed quantities: mass_fraction_of_rainfall_falling_onto_surface_snow (1) 'The quantity with standard name mass_fraction_of_rainfall_falling_onto_surface_snow is the mass of rainfall falling onto snow as a fraction of the mass of rainfall falling within the area of interest. The phrase "surface_snow" means snow lying on the surface. Unless indicated in the cell_methods attribute, a quantity is assumed to apply to the whole area of each horizontal grid box.' mass_fraction_of_solid_precipitation_falling_onto_surface_snow (1) 'Solid precipitation refers to the precipitation of water in the solid phase. Water in the atmosphere exists in one of three phases: solid, liquid or vapor. The solid phase can exist as snow, hail, graupel, cloud ice, or as a component of aerosol. The quantity with standard name mass_fraction_of_solid_precipitation_falling_onto_surface_snow is the mass of solid precipitation falling onto snow as a fraction of the mass of solid precipitation falling within the area of interest. The phrase "surface_snow" means snow lying on the surface. Unless indicated in the cell_methods attribute, a quantity is assumed to apply to the whole area of each horizontal grid box.' Is this better? Best wishes, Alison ________________________________ From: Juckes, Martin (STFC,RAL,RALSP) Sent: 03 July 2018 09:48:56 To: Pamment, Alison (STFC,RAL,RALSP); mailto:cf-metadata@cgd.ucar.edu Subject: Re: [CF-metadata] Precipitation fractions for LS3MIP Dear Alison, thanks, those names look good. I see a slight ambiguity in the description where it refers to "the horizontal domain" being defined by a coordinate variable: there are two horizontal domains here, the snow covered area for the numerator and a reference area for the denominator of the fraction. The denominator could be, for example, rainfall onto land or onto the total grid area. What is the "domain" that is intended to be represented by the coordinate variable? regards, Martin ________________________________ From: CF-metadata <mailto:cf-metadata-boun...@cgd.ucar.edu> on behalf of Alison Pamment - UKRI STFC <mailto:alison.pamm...@stfc.ac.uk> Sent: 28 June 2018 16:50 To: mailto:cf-metadata@cgd.ucar.edu Subject: Re: [CF-metadata] Precipitation fractions for LS3MIP Dear Karl, Jonathan and Martin, I think we are edging toward agreement on these names. Karl and Jonathan have agreed that these could be mass_fraction_of_X_falling_onto_surface_snow, where X is rainfall or solid_precipitation, and I am also okay with this solution. Martin, if you are happy with the names as written below then I think these two can be accepted. mass_fraction_of_rainfall_falling_onto_surface_snow (1) 'The quantity with standard name mass_fraction_of_rainfall_falling_onto_surface_snow is the mass of rainfall falling onto snow as a fraction of the mass of rainfall falling within the area of interest. The horizontal domain over which the quantity is calculated is described by the associated coordinate variables and coordinate bounds or by a coordinate variable or scalar coordinate variable with the standard name of "region" supplied according to section 6.1.1 of the CF conventions. The phrase "surface_snow" means snow lying on the surface.' mass_fraction_of_solid_precipitation_falling_onto_surface_snow (1) 'Solid precipitation refers to the precipitation of water in the solid phase. Water in the atmosphere exists in one of three phases: solid, liquid or vapor. The solid phase can exist as snow, hail, graupel, cloud ice, or as a component of aerosol. The quantity with standard name mass_fraction_of_solid_precipitation_falling_onto_surface_snow is the mass of solid precipitation falling onto snow as a fraction of the mass of solid precipitation falling within the area of interest. The horizontal domain over which the quantity is calculated is described by the associated coordinate variables and coordinate bounds or by a coordinate variable or scalar coordinate variable with the standard name of "region" supplied according to section 6.1.1 of the CF conventions. The phrase "surface_snow" means snow lying on the surface.' Best wishes, Alison ------ Alison Pamment Tel: +44 1235 778065 NCAS/Centre for Environmental Data Archival Email: mailto:alison.pamm...@stfc.ac.uk STFC Rutherford Appleton Laboratory R25, 2.22 Harwell Oxford, Didcot, OX11 0QX, U.K. -----Original Message----- From: CF-metadata <mailto:cf-metadata-boun...@cgd.ucar.edu> On Behalf Of Karl Taylor Sent: 25 June 2018 18:06 To: mailto:cf-metadata@cgd.ucar.edu Subject: Re: [CF-metadata] Precipitation fractions for LS3MIP Hi Jonathan, I had objected to mass_fraction earlier, but if it is immediately followed, for example, by "of_rainfall" it won't get confused with the mass_fraction used to describe a single species in a mixture. I don't like "amount" because although it is a ratio, I think it normally describes an extensive quantity, and the fractions we want to report could be instantaneous. I suppose rainfall_flux or rainfall_rate would also be o.k. Your suggestion to start with, for example, "mass_fraction_of_rainfall ..." would also be o.k. with me. best regards, Karl On 6/25/18 6:38 AM, Jonathan Gregory wrote: > Dear Alison et al. > > I still find myself tripping over rainfall_mass. Why not > rainfall_amount, rainfall_flux or rainfall_rate? They would all be the > same number, since it's a *fraction*. Another possibility would be a > reordering to > mass_fraction_of_rainfall_falling_onto_surface_snow (1) > mass_fraction_of_solid_precipitation_falling_onto_surface_snow (1) > We have many mass_fraction names, and consistency could be good. > > Best wishes > > Jonathan > > ----- Forwarded message from Alison Pamment - UKRI STFC > <mailto:alison.pamm...@stfc.ac.uk> ----- > >> Date: Thu, 21 Jun 2018 11:34:45 +0000 >> From: Alison Pamment - UKRI STFC <mailto:alison.pamm...@stfc.ac.uk> >> To: 'Karl Taylor' <mailto:taylo...@llnl.gov>, Martin Juckes - UKRI STFC >> <mailto:martin.juc...@stfc.ac.uk>, "CF-metadata >> (mailto:cf-metadata@cgd.ucar.edu)" >> <mailto:cf-metadata@cgd.ucar.edu> >> Subject: Re: [CF-metadata] Precipitation fractions for LS3MIP >> >> Dear Martin, Jonathan, Karl, >> >> I have had another look at these two names and amended the definitions in >> the light of the discussion. >> >> fraction_of_rainfall_mass_falling_onto_surface_snow (1) 'The quantity >> with standard name fraction_of_rainfall_mass_falling_onto_surface_snow is >> the mass of rainfall falling onto snow as a fraction of the mass of rainfall >> falling within the area of interest. The horizontal domain over which the >> quantity is calculated is described by the associated coordinate variables >> and coordinate bounds or by a coordinate variable or scalar coordinate >> variable with the standard name of "region" supplied according to section >> 6.1.1 of the CF conventions. The phrase "surface_snow" means snow lying on >> the surface.' >> >> fraction_of_solid_precipitation_mass_falling_onto_surface_snow (1) >> 'Solid precipitation refers to the precipitation of water in the solid >> phase. Water in the atmosphere exists in one of three phases: solid, liquid >> or vapor. The solid phase can exist as snow, hail, graupel, cloud ice, or as >> a component of aerosol. The quantity with standard name >> fraction_of_solid_precipitation_mass_falling_onto_surface_snow is the mass >> of solid precipitation falling onto snow as a fraction of the mass of solid >> precipitation falling within the area of interest. The horizontal domain >> over which the quantity is calculated is described by the associated >> coordinate variables and coordinate bounds or by a coordinate variable or >> scalar coordinate variable with the standard name of "region" supplied >> according to section 6.1.1 of the CF conventions. The phrase "surface_snow" >> means snow lying on the surface.' >> >> Are these okay? If so I think they can be accepted. >> >> Best wishes, >> Alison >> >> ------ >> Alison Pamment Tel: +44 1235 778065 >> NCAS/Centre for Environmental Data Archival Email: >> mailto:alison.pamm...@stfc.ac.uk >> STFC Rutherford Appleton Laboratory >> R25, 2.22 >> Harwell Oxford, Didcot, OX11 0QX, U.K. >> >> -----Original Message----- >> From: CF-metadata <mailto:cf-metadata-boun...@cgd.ucar.edu> On Behalf Of >> Alison Pamment - UKRI STFC >> Sent: 11 June 2018 11:33 >> To: 'Karl Taylor' <mailto:taylo...@llnl.gov>; Juckes, Martin >> (STFC,RAL,RALSP) <mailto:martin.juc...@stfc.ac.uk>; CF-metadata >> (mailto:cf-metadata@cgd.ucar.edu) <mailto:cf-metadata@cgd.ucar.edu> >> Subject: Re: [CF-metadata] Precipitation fractions for LS3MIP >> >> Dear Martin, Karl and Steve, >> >> Thank you for the proposing these two names and the comments received so far. >> >> fraction_of_rainfall_mass_falling_onto_surface_snow (1) 'The phrase >> "surface_snow" means snow lying on the surface.' >> >> fraction_of_solid_precipitation_mass_falling_onto_surface_snow (1) 'The >> phrase "surface_snow" means snow lying on the surface. Solid precipitation >> refers to the precipitation of water in the solid phase. Water in the >> atmosphere exists in one of three phases: solid, liquid or vapor. The solid >> phase can exist as snow, hail, graupel, cloud ice, or as a component of >> aerosol.' >> >> The names and units look fine. >> >> Are these variables calculated over quite large areas? If so, would it be >> appropriate to add the following sentence to their definitions: >> 'The horizontal domain over which the quantity is calculated is described by >> the associated coordinate variables and coordinate bounds or by a coordinate >> variable or scalar coordinate variable with the standard name of "region" >> supplied according to section 6.1.1 of the CF conventions'? >> >> This is what we do with names like land_ice_mass where the quantity might >> represent the mass of a whole ice sheet, rather than something calculated in >> a small lat-long grid box. >> >> Best wishes, >> Alison >> >> ------ >> Alison Pamment Tel: +44 1235 778065 >> NCAS/Centre for Environmental Data Archival Email: >> mailto:alison.pamm...@stfc.ac.uk >> STFC Rutherford Appleton Laboratory >> R25, 2.22 >> Harwell Oxford, Didcot, OX11 0QX, U.K. >> >> From: CF-metadata <mailto:cf-metadata-boun...@cgd.ucar.edu> On Behalf Of >> Karl Taylor >> Sent: 05 June 2018 17:03 >> To: Steven Emmerson <mailto:emmer...@ucar.edu>; Juckes, Martin >> (STFC,RAL,RALSP) <mailto:martin.juc...@stfc.ac.uk> >> Cc: mailto:cf-metadata@cgd.ucar.edu >> Subject: Re: [CF-metadata] Precipitation fractions for LS3MIP >> >> Hi all, >> >> I think in common usage "mass fraction" is the ratio of the mass of a >> particular species to the total mass of all species combined (e.g., the mass >> fraction of oxygen molecules in air). For the variable considered here, the >> fraction refers to the ratio of the mass of as particular "species" (e.g., >> rain) that falls on a particular surface (e.g., surface snow). This is >> enough different from the standard usage that I think it would be wise to >> avoid "mass fraction" in the standard name; thus, the suggestion: >> >> fraction_of_rainfall_mass_falling_onto_surface_snow >> >> Using "mass_fraction" here might lead some to wrongly jump to an >> interpretation that this had something to do with the fraction of >> precipitation that was falling as rain. >> >> best regards, >> Karl >> On 6/5/18 7:55 AM, Steven Emmerson wrote: >> Greetings, >> >> On Tue, Jun 5, 2018 at 3:31 AM, Martin Juckes - UKRI STFC >> <mailto:martin.juc...@stfc.ac.uk> wrote: >> We don't want the mass per unit area on snow divided by the mass per unit >> area on the whole grid cell, but rather, as Jonathan has spelled out, the >> mass on snow divided by the mass on the whole grid cell. Hence, I support >> Karl's suggestion of using "mass" in the name, rather than "amount". >> >> I believe that's called a "mass fraction". See Table 12 of >> <https://www.nist.gov/pml/nist-guide-si-chapter-8-comments-some-quantities-and-their-units>. >> >> Regards, >> Steve Emmerson >> >> _______________________________________________ >> CF-metadata mailing list >> mailto:CF-metadata@cgd.ucar.edu >> http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata >> >> _______________________________________________ >> CF-metadata mailing list >> mailto:CF-metadata@cgd.ucar.edu >> http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata > ----- End forwarded message ----- > _______________________________________________ > CF-metadata mailing list > mailto:CF-metadata@cgd.ucar.edu > http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata _______________________________________________ CF-metadata mailing list mailto:CF-metadata@cgd.ucar.edu http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata _______________________________________________ CF-metadata mailing list mailto:CF-metadata@cgd.ucar.edu http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata _______________________________________________ CF-metadata mailing list CF-metadata@cgd.ucar.edu http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata
