Thanks a lot!
Greez,
Bastian
----- Original Message -----
From: Tim Blair
To: CF-Talk
Sent: Tuesday, September 30, 2003 4:09 PM
Subject: RE: Parameters with <cfmail> in CFMX
> Is it impossible to use parameters within the <cfmail> Tag?
> Or is there somethng wrong in my code?
If you're using MX6.1 then there is an incompatibility with the "old"
way of sending multipart mails (as you are doing it) and with the new
<cfmailpart> tag.
http://tech.badpen.com/index.cfm?mode=entry&entry=2
HTH,
Tim.
-------------------------------------------------------
OUR NEW SITE IS NOW LIVE
Visit our new website at http://www.rawnet.com/ and
race around the beautiful Bracknell streets at
http://xmas.rawnet.com/
-------------------------------------------------------
Tim Blair
Web Application Engineer, Rawnet Limited
Direct Phone : +44 (0) 1344 393 441
Switchboard : +44 (0) 1344 393 040
-------------------------------------------------------
This message may contain information which is legally
privileged and/or confidential. If you are not the
intended recipient, you are hereby notified that any
unauthorised disclosure, copying, distribution or use
of this information is strictly prohibited. Such
notification notwithstanding, any comments, opinions,
information or conclusions expressed in this message
are those of the originator, not of rawnet limited,
unless otherwise explicitly and independently indicated
by an authorised representative of rawnet limited.
-------------------------------------------------------
[Todays Threads] [This Message] [Subscription] [Fast Unsubscribe] [User Settings]