Dave,
Thanks for taking the time to answer my question. However, I already wiped my MX7 installation and just re-installed it. Luckily this was NOT on a production server, and everything is good now. I wish I would have seen your post, before I did that. Just so I could try that solution. Looking back though, I think my error was in that I just overwrote the wsconfig.jar. But if I understand you correctly, what I should have done was: 1) run the current(meaning Flex Adapter updated version) wsconfig.jar with the appropriate extensions to uninstall itself. 2) THEN copy the wsconfig.jar backup, over the Flex one. 3) Then re-run the newly copied wsconfig.jar to do its magic. Am I correct in that assumption? Anyway a good thing to know if I started dabbling with Flex again and need to turn it on or off. Just wanted to thank you Dave for being active on this list. Although I lurk a lot, your responses to many of the posts on here have helped me immensely. Thanks, Ali >The wsconfig.jar file is just the installer for the web server configuration >files. You will need to rerun the correct wsconfig.jar to reconnect CF with >your web server. Depending on what you've already done, you may need to >rerun the other wsconfig.jar to delete existing web server configuration >stuff first. > >Dave Watts, CTO, Fig Leaf Software >http://www.figleaf.com/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| Message: http://www.houseoffusion.com/lists.cfm/link=i:4:237687 Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4 Subscription: http://www.houseoffusion.com/lists.cfm/link=s:4 Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4 Donations & Support: http://www.houseoffusion.com/tiny.cfm/54