The Now() function though is an Access function and not the CF one. I just tried using the Date() function to see if that would change anything but no luck. I just tried the yes/no and 1/0 again just to make sure I was remembering correctly and also tried variations of that with cfqueryparam. I left it with a cfqueryparam and the bit type with the value of 1 because after searching through the app I saw that is how it did its searches.
It is definitely that last line though since if I remove it then I get no errors. I will play with it some more and see what in there would be the cause. So far I have also tried passing in the other two optional pieces to the function but that changed nothing. On Fri, Sep 12, 2008 at 8:46 AM, Scott Stewart <[EMAIL PROTECTED]>wrote: > Couple of things to try, > > Access will accept "yes/no" or "1/0" depending on what you've selected > in the design of the DB. > default is "yes/no" (I think). > > wrap up the now() in "CreateODBCDate()" and see if that clears it up. > It's been ages since I've touched Access. > > Aaron Rouse wrote: > > Using 1 instead of Yes throws an error if I remember correctly because > that > > was one of my first guesses as well. I am going to try some of these > ideas > > this afternoon once I have access to it again(work got canceled due to > > hurricane Ike). > > > > On Fri, Sep 12, 2008 at 8:27 AM, Mark Kruger <[EMAIL PROTECTED]> > wrote: > > > > > >> My guess would be the bit column... Use a 0 or 1.... > >> > >> > >> UPDATE FAILUREREPORT > >> SET STR_DISPOSITION = 'SCRAP' > >> WHERE STR_DISPOSITION IS NULL > >> AND INT_PARTRETURNED = 1 > >> AND DT_PARTRETURNED IS NOT NULL > >> AND DATEDIFF("d", DT_PARTRETURNED, NOW()) > 30 > >> > >> You might also try "= NULL" instead of "IS NULL". The driver is being > >> particular. > >> > >> > >> > >> -Mark > >> > >> > >> > >> Mark A. Kruger, CFG, MCSE > >> (402) 408-3733 ext 105 > >> www.cfwebtools.com > >> www.coldfusionmuse.com > >> www.necfug.com > >> > >> -----Original Message----- > >> From: Aaron Rouse [mailto:[EMAIL PROTECTED] > >> Sent: Thursday, September 11, 2008 10:09 PM > >> To: CF-Talk > >> Subject: Re: CF and Access > >> > >> Yeah, the function is an Access function, just has the same name as CF. > I > >> thought maybe the Yes/No column was throwing it off initially and tried > a > >> cfqueryparam on that one but it helped none. I did not play with the > date > >> though and will see if maybe that is the root of it. > >> > >> On Thu, Sep 11, 2008 at 7:35 PM, Matt Quackenbush > >> <[EMAIL PROTECTED]>wrote: > >> > >> > >>> No problem with using DateDiff() as he is using it, since it is not > >>> surrounded by #. It has been a bazillion years since I've used > >>> Access, but as I recall, that particular error message has something > >>> to do with a lack of quotes (e.g. 'foo') on a field that the driver > >>> wants them on. Maybe the date field? Can't remember for sure. > >>> > >>> > >>> On Thu, Sep 11, 2008 at 7:28 PM, Mike Little wrote: > >>> > >>> > >>>> at a rough guess, i suspect that you cannot use an explicit cf > >>>> function such as datediff in the query. > >>>> > >>>> > >>> > >>> > >> > >> > >> > > > > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date Get the Free Trial http://ad.doubleclick.net/clk;203748912;27390454;j Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:312428 Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4