Updated from head SVN - no conflicts.
Still runs without failures.
On Wed, 17 Jun 2015 at 15:08 Pedro Ferreira <arkang...@gmail.com> wrote:
> Sorry, that was my bad. I forgot to set my editor back to llvm indentation
> settings and it inserted tabs instead of spaces.
>
> Line 1000 of SemaTypes is 79 characters long, which is the largest
> (longest) line in the patch. It is the same length of line 981 from where I
> copy-pasted the code (by your suggestion).
>
> Grep claims the attached patch has no tabs now :)
>
> On Wed, 17 Jun 2015 at 14:47 Anastasia Stulova <anastasia.stul...@arm.com>
> wrote:
>
>> I think there are still lines that are too long (especially in
>> SemaType.cpp). Have you run clang-format on your changes?
>>
>>
>>
>> Otherwise, no further comments from my side.
>>
>>
>>
>> Anastasia
>>
>>
>>
>> *From:* Pedro Ferreira [mailto:arkang...@gmail.com]
>> *Sent:* 15 June 2015 09:16
>> *To:* Eric Christopher; Anastasia Stulova; cfe-commits@cs.uiuc.edu
>>
>>
>> *Subject:* Re: [PATCH] OpenCL: Add new types for OpenCL 2.0
>>
>>
>>
>> There were a couple lines with > 80 columns, and this new patch version
>> fixes them.
>>
>>
>>
>>
>>
>> On Fri, 12 Jun 2015 at 21:03 Eric Christopher <echri...@gmail.com> wrote:
>>
>> Drive by review here.
>>
>>
>>
>> I was making sure there was debug info support for the bits, thanks for
>> adding it though I'm not seeing any tests ;)
>>
>>
>>
>> I'm pretty sure you have some 80-column violations and other formatting
>> things, could you clang-format your patch?
>>
>>
>>
>> Thanks!
>>
>>
>>
>> -eric
>>
>> On Fri, Jun 12, 2015 at 4:20 AM Pedro Ferreira <arkang...@gmail.com>
>> wrote:
>>
>> Awesome, thanks for the tips.
>> Updated version attached.
>>
>>
>>
>> Pedro
>>
>>
>>
>> On Thu, 11 Jun 2015 at 19:23 Anastasia Stulova <anastasia.stul...@arm.com>
>> wrote:
>>
>> CodeGen tests looks good!
>>
>> Regarding the extension, could you diagnose it during the type checking
>> instead. That way it will be cover all cases. You can look at the CL2.0
>> atomic type implementation in SemaType.cpp ConvertDeclSpecToType. Also
>> please reuse the same error err_type_requires_extension instead of adding
>> the new one. Please, add Sema test demonstating the error handling works
>> correctly.
>>
>> Thanks,
>> Anastasia
>> ________________________________________
>> From: Pedro Ferreira [arkang...@gmail.com]
>> Sent: Thursday, June 11, 2015 12:50 PM
>> To: Anastasia Stulova; cfe-commits@cs.uiuc.edu
>> Subject: Re: [PATCH] OpenCL: Add new types for OpenCL 2.0
>>
>> Ok, found out the right place to diagnose the extension and added the
>> tests.
>> I am not particularly convinced that was the best way to do it; comments
>> welcome.
>>
>> Pedro
>>
>> On Thu, 11 Jun 2015 at 11:43 Pedro Ferreira <arkang...@gmail.com<mailto:
>> arkang...@gmail.com>> wrote:
>> Actually, I spoke too soon - I found a test with -cl-std=CL2.0. I missed
>> that.
>>
>> On Thu, 11 Jun 2015 at 11:40 Pedro Ferreira <arkang...@gmail.com<mailto:
>> arkang...@gmail.com>> wrote:
>> The codegen test would imply adding a -cl-std=2.0 option to Clang, which
>> it currently does not have. This is because the types should only be
>> recognised if the CL 2.0 standard is explicitly asked for (the default is
>> to operate on 1.2 mode). Adding that option is a peripheral issue. I've
>> added the types on the header test under the appropriate "#if defined" but
>> when I tried to do the same on the .cl file, I found out that the test
>> parser does not recognise the preprocessor macro and therefore was causing
>> the test to (incorrectly) fail. As such, I reverted the test.
>>
>> As for the AS for the other types, I copy-pasted the code from event_t.
>> That's the reason why I'm actually using the "0". Are you suggesting I
>> should change event_t to use something else, and by consequence the new
>> types too? That would be a separate issue.
>> My guess is that these types are allocated on the stack, which by llvm
>> convention will always be 0.
>>
>> The new types are used by new builtins. I don't think there are any other
>> special semantics to it.
>>
>> I've added extension checks on the MSAA types, but I'm not sure if this
>> is the right place. New patch attached.
>>
>> Pedro
>>
>> On Thu, 11 Jun 2015 at 10:33 Anastasia Stulova <anastasia.stul...@arm.com
>> <mailto:anastasia.stul...@arm.com>> wrote:
>> Hi Pedro,
>>
>> Could we also add a Codegen test? Also it would be better not to use
>> constant directly as address space as the mapping could ideally be changed.
>> Is there any reason why you generate pointers to private AS?
>>
>> Are there any operations allowed on new types? Any semantical checks
>> needed?
>>
>> If MSAA types are part of an extension and not a part of the general
>> standard we should ideally diagnose that extension is enabled when they are
>> being used.
>>
>> Regards,
>> Anastasia
>> ________________________________________
>> From: cfe-commits-boun...@cs.uiuc.edu<mailto:
>> cfe-commits-boun...@cs.uiuc.edu> [cfe-commits-boun...@cs.uiuc.edu<mailto:
>> cfe-commits-boun...@cs.uiuc.edu>] On Behalf Of Pedro Ferreira [
>> arkang...@gmail.com<mailto:arkang...@gmail.com>]
>> Sent: Thursday, June 11, 2015 8:18 AM
>> To: cfe-commits@cs.uiuc.edu<mailto:cfe-commits@cs.uiuc.edu>
>> Subject: [PATCH] OpenCL: Add new types for OpenCL 2.0
>>
>> Hi all,
>>
>> This patch adds the new OpenCL types for 2.0 described at
>> https://www.khronos.org/registry/cl/sdk/2.0/docs/man/xhtml/otherDataTypes.html
>> <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.khronos.org_registry_cl_sdk_2.0_docs_man_xhtml_otherDataTypes.html&d=AwMFaQ&c=8hUWFZcy2Z-Za5rBPlktOQ&r=BSqEv9KvKMW_Ob8SyngJ70KdZISM_ASROnREeq0cCxk&m=9Bdb39VF2l8sby_fS5dvbUnJSVMkbUEkua5v-UqAuGY&s=5Dqa4a6V-GRZkKn3l59ia5wJtJJzBqEjUrQlOV-8t-w&e=>
>> <
>> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.khronos.org_registry_cl_sdk_2.0_docs_man_xhtml_otherDataTypes.html&d=AwMFaQ&c=8hUWFZcy2Z-Za5rBPlktOQ&r=BSqEv9KvKMW_Ob8SyngJ70KdZISM_ASROnREeq0cCxk&m=42YnWExwxwpeU6GPDY2_3RFxCqQakUbj_CXZsMsQ2jU&s=REOBNoaDio7qDyIDCqmXhxFvZYjMOK6vuXAttjOVsNI&e=
>> >
>> I also opened https://llvm.org/bugs/show_bug.cgi?id=23794
>> <https://urldefense.proofpoint.com/v2/url?u=https-3A__llvm.org_bugs_show-5Fbug.cgi-3Fid-3D23794&d=AwMFaQ&c=8hUWFZcy2Z-Za5rBPlktOQ&r=BSqEv9KvKMW_Ob8SyngJ70KdZISM_ASROnREeq0cCxk&m=9Bdb39VF2l8sby_fS5dvbUnJSVMkbUEkua5v-UqAuGY&s=DaxUQk4vxUwKYs93ZTAVu1S6Hdg2CQ1J96KmGJWtfDg&e=>
>> <
>> https://urldefense.proofpoint.com/v2/url?u=https-3A__llvm.org_bugs_show-5Fbug.cgi-3Fid-3D23794&d=AwMFaQ&c=8hUWFZcy2Z-Za5rBPlktOQ&r=BSqEv9KvKMW_Ob8SyngJ70KdZISM_ASROnREeq0cCxk&m=42YnWExwxwpeU6GPDY2_3RFxCqQakUbj_CXZsMsQ2jU&s=TAV4suAMaHgdIPA83Da3pQl7c68On7bAFWtnrUbt_Uk&e=>
>> for this. I keep forgetting you prefer patches sent to this mailing list.
>> This also adds lldb entries (fixes switch warnings).
>>
>> The types are:
>>
>> image2d_depth_t
>> image2d_array_depth_t
>> image2d_msaa_t
>> image2d_array_msaa_t
>> image2d_msaa_depth_t
>> image2d_array_msaa_depth_t
>> queue_t
>> ndrange_t
>> clk_event_t
>> reserve_id_t
>>
>> let me know if something looks wrong,
>> Pedro
>>
>> -- IMPORTANT NOTICE: The contents of this email and any attachments are
>> confidential and may also be privileged. If you are not the intended
>> recipient, please notify the sender immediately and do not disclose the
>> contents to any other person, use it for any purpose, or store or copy the
>> information in any medium. Thank you.
>>
>> ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ,
>> Registered in England & Wales, Company No: 2557590
>> ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ,
>> Registered in England & Wales, Company No: 2548782
>>
>>
>> -- IMPORTANT NOTICE: The contents of this email and any attachments are
>> confidential and may also be privileged. If you are not the intended
>> recipient, please notify the sender immediately and do not disclose the
>> contents to any other person, use it for any purpose, or store or copy the
>> information in any medium. Thank you.
>>
>> ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ,
>> Registered in England & Wales, Company No: 2557590
>> ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ,
>> Registered in England & Wales, Company No: 2548782
>>
>> _______________________________________________
>> cfe-commits mailing list
>> cfe-commits@cs.uiuc.edu
>> http://lists.cs.uiuc.edu/mailman/listinfo/cfe-commits
>>
>>
Index: include/clang/AST/ASTContext.h
===================================================================
--- include/clang/AST/ASTContext.h (revision 239908)
+++ include/clang/AST/ASTContext.h (working copy)
@@ -829,9 +829,12 @@
CanQualType ObjCBuiltinIdTy, ObjCBuiltinClassTy, ObjCBuiltinSelTy;
CanQualType ObjCBuiltinBoolTy;
CanQualType OCLImage1dTy, OCLImage1dArrayTy, OCLImage1dBufferTy;
- CanQualType OCLImage2dTy, OCLImage2dArrayTy;
+ CanQualType OCLImage2dTy, OCLImage2dArrayTy, OCLImage2dDepthTy;
+ CanQualType OCLImage2dArrayDepthTy, OCLImage2dMSAATy, OCLImage2dArrayMSAATy;
+ CanQualType OCLImage2dMSAADepthTy, OCLImage2dArrayMSAADepthTy;
CanQualType OCLImage3dTy;
- CanQualType OCLSamplerTy, OCLEventTy;
+ CanQualType OCLSamplerTy, OCLEventTy, OCLClkEventTy;
+ CanQualType OCLQueueTy, OCLNDRangeTy, OCLReserveIDTy;
// Types for deductions in C++0x [stmt.ranged]'s desugaring. Built on demand.
mutable QualType AutoDeductTy; // Deduction against 'auto'.
Index: include/clang/AST/BuiltinTypes.def
===================================================================
--- include/clang/AST/BuiltinTypes.def (revision 239908)
+++ include/clang/AST/BuiltinTypes.def (working copy)
@@ -160,6 +160,12 @@
BUILTIN_TYPE(OCLImage1dBuffer, OCLImage1dBufferTy)
BUILTIN_TYPE(OCLImage2d, OCLImage2dTy)
BUILTIN_TYPE(OCLImage2dArray, OCLImage2dArrayTy)
+BUILTIN_TYPE(OCLImage2dDepth, OCLImage2dDepthTy)
+BUILTIN_TYPE(OCLImage2dArrayDepth, OCLImage2dArrayDepthTy)
+BUILTIN_TYPE(OCLImage2dMSAA, OCLImage2dMSAATy)
+BUILTIN_TYPE(OCLImage2dArrayMSAA, OCLImage2dArrayMSAATy)
+BUILTIN_TYPE(OCLImage2dMSAADepth, OCLImage2dMSAADepthTy)
+BUILTIN_TYPE(OCLImage2dArrayMSAADepth, OCLImage2dArrayMSAADepthTy)
BUILTIN_TYPE(OCLImage3d, OCLImage3dTy)
// OpenCL sampler_t.
@@ -168,6 +174,18 @@
// OpenCL event_t.
BUILTIN_TYPE(OCLEvent, OCLEventTy)
+// OpenCL clk_event_t.
+BUILTIN_TYPE(OCLClkEvent, OCLClkEventTy)
+
+// OpenCL queue_t.
+BUILTIN_TYPE(OCLQueue, OCLQueueTy)
+
+// OpenCL ndrange_t.
+BUILTIN_TYPE(OCLNDRange, OCLNDRangeTy)
+
+// OpenCL reserve_id_t.
+BUILTIN_TYPE(OCLReserveID, OCLReserveIDTy)
+
// This represents the type of an expression whose type is
// totally unknown, e.g. 'T::foo'. It is permitted for this to
// appear in situations where the structure of the type is
Index: include/clang/AST/Type.h
===================================================================
--- include/clang/AST/Type.h (revision 239908)
+++ include/clang/AST/Type.h (working copy)
@@ -1598,6 +1598,12 @@
bool isImage1dBufferT() const; // OpenCL image1d_buffer_t
bool isImage2dT() const; // OpenCL image2d_t
bool isImage2dArrayT() const; // OpenCL image2d_array_t
+ bool isImage2dDepthT() const; // Opencl image_2d_depth_t
+ bool isImage2dArrayDepthT() const; // Opencl image_2d_array_depth_t
+ bool isImage2dMSAAT() const; // Opencl image_2d_msaa_t
+ bool isImage2dArrayMSAAT() const; // Opencl image_2d_array_msaa_t
+ bool isImage2dMSAATDepth() const; // Opencl image_2d_msaa_depth_t
+ bool isImage2dArrayMSAATDepth() const; // Opencl image_2d_array_msaa_depth_t
bool isImage3dT() const; // OpenCL image3d_t
bool isImageType() const; // Any OpenCL image type
@@ -1604,6 +1610,10 @@
bool isSamplerT() const; // OpenCL sampler_t
bool isEventT() const; // OpenCL event_t
+ bool isClkEventT() const; // OpenCL clk_event_t
+ bool isQueueT() const; // OpenCL queue_t
+ bool isNDRangeT() const; // OpenCL ndrange_t
+ bool isReserveIDT() const; // OpenCL reserve_id_t
bool isOpenCLSpecificType() const; // Any OpenCL specific type
@@ -5064,6 +5074,30 @@
return isSpecificBuiltinType(BuiltinType::OCLImage2dArray);
}
+inline bool Type::isImage2dDepthT() const {
+ return isSpecificBuiltinType(BuiltinType::OCLImage2dDepth);
+}
+
+inline bool Type::isImage2dArrayDepthT() const {
+ return isSpecificBuiltinType(BuiltinType::OCLImage2dArrayDepth);
+}
+
+inline bool Type::isImage2dMSAAT() const {
+ return isSpecificBuiltinType(BuiltinType::OCLImage2dMSAA);
+}
+
+inline bool Type::isImage2dArrayMSAAT() const {
+ return isSpecificBuiltinType(BuiltinType::OCLImage2dArrayMSAA);
+}
+
+inline bool Type::isImage2dMSAATDepth() const {
+ return isSpecificBuiltinType(BuiltinType::OCLImage2dMSAADepth);
+}
+
+inline bool Type::isImage2dArrayMSAATDepth() const {
+ return isSpecificBuiltinType(BuiltinType::OCLImage2dArrayMSAADepth);
+}
+
inline bool Type::isImage3dT() const {
return isSpecificBuiltinType(BuiltinType::OCLImage3d);
}
@@ -5076,14 +5110,35 @@
return isSpecificBuiltinType(BuiltinType::OCLEvent);
}
+inline bool Type::isClkEventT() const {
+ return isSpecificBuiltinType(BuiltinType::OCLClkEvent);
+}
+
+inline bool Type::isQueueT() const {
+ return isSpecificBuiltinType(BuiltinType::OCLQueue);
+}
+
+inline bool Type::isNDRangeT() const {
+ return isSpecificBuiltinType(BuiltinType::OCLNDRange);
+}
+
+inline bool Type::isReserveIDT() const {
+ return isSpecificBuiltinType(BuiltinType::OCLReserveID);
+}
+
inline bool Type::isImageType() const {
return isImage3dT() ||
- isImage2dT() || isImage2dArrayT() ||
+ isImage2dT() || isImage2dArrayT() || isImage2dDepthT() ||
+ isImage2dArrayDepthT() || isImage2dMSAAT() ||
+ isImage2dArrayMSAAT() || isImage2dMSAATDepth() ||
+ isImage2dArrayMSAATDepth() ||
isImage1dT() || isImage1dArrayT() || isImage1dBufferT();
}
inline bool Type::isOpenCLSpecificType() const {
- return isSamplerT() || isEventT() || isImageType();
+ return isSamplerT() || isEventT() || isImageType() ||
+ isClkEventT() || isQueueT() || isNDRangeT() ||
+ isReserveIDT();
}
inline bool Type::isTemplateTypeParmType() const {
Index: include/clang/Basic/OpenCLExtensions.def
===================================================================
--- include/clang/Basic/OpenCLExtensions.def (revision 239908)
+++ include/clang/Basic/OpenCLExtensions.def (working copy)
@@ -26,6 +26,9 @@
OPENCLEXT(cl_khr_byte_addressable_store)
OPENCLEXT(cl_khr_3d_image_writes)
+// OpenCL 2.0
+OPENCLEXT(cl_khr_gl_msaa_sharing)
+
// Clang Extensions.
OPENCLEXT(cl_clang_storage_class_specifiers)
Index: include/clang/Serialization/ASTBitCodes.h
===================================================================
--- include/clang/Serialization/ASTBitCodes.h (revision 239908)
+++ include/clang/Serialization/ASTBitCodes.h (working copy)
@@ -769,15 +769,35 @@
/// \brief OpenCL 1d image buffer type.
PREDEF_TYPE_IMAGE1D_BUFF_ID = 40,
/// \brief OpenCL 2d image type.
- PREDEF_TYPE_IMAGE2D_ID = 41,
+ PREDEF_TYPE_IMAGE2D_ID = 41,
/// \brief OpenCL 2d image array type.
PREDEF_TYPE_IMAGE2D_ARR_ID = 42,
+ /// \brief OpenCL 2d image depth type.
+ PREDEF_TYPE_IMAGE2D_DEP_ID = 43,
+ /// \brief OpenCL 2d image array depth type.
+ PREDEF_TYPE_IMAGE2D_ARR_DEP_ID = 44,
+ /// \brief OpenCL 2d image MSAA type.
+ PREDEF_TYPE_IMAGE2D_MSAA_ID = 45,
+ /// \brief OpenCL 2d image array MSAA type.
+ PREDEF_TYPE_IMAGE2D_ARR_MSAA_ID = 46,
+ /// \brief OpenCL 2d image MSAA depth type.
+ PREDEF_TYPE_IMAGE2D_MSAA_DEP_ID = 47,
+ /// \brief OpenCL 2d image array MSAA depth type.
+ PREDEF_TYPE_IMAGE2D_ARR_MSAA_DEPTH_ID = 48,
/// \brief OpenCL 3d image type.
- PREDEF_TYPE_IMAGE3D_ID = 43,
+ PREDEF_TYPE_IMAGE3D_ID = 49,
/// \brief OpenCL event type.
- PREDEF_TYPE_EVENT_ID = 44,
+ PREDEF_TYPE_EVENT_ID = 50,
+ /// \brief OpenCL clk event type.
+ PREDEF_TYPE_CLK_EVENT_ID = 51,
/// \brief OpenCL sampler type.
- PREDEF_TYPE_SAMPLER_ID = 45
+ PREDEF_TYPE_SAMPLER_ID = 52,
+ /// \brief OpenCL queue type.
+ PREDEF_TYPE_QUEUE_ID = 53,
+ /// \brief OpenCL ndrange type.
+ PREDEF_TYPE_NDRANGE_ID = 54,
+ /// \brief OpenCL reserve_id type.
+ PREDEF_TYPE_RESERVE_ID_ID = 55
};
/// \brief The number of predefined type IDs that are reserved for
Index: lib/AST/ASTContext.cpp
===================================================================
--- lib/AST/ASTContext.cpp (revision 239908)
+++ lib/AST/ASTContext.cpp (working copy)
@@ -1059,10 +1059,21 @@
InitBuiltinType(OCLImage1dBufferTy, BuiltinType::OCLImage1dBuffer);
InitBuiltinType(OCLImage2dTy, BuiltinType::OCLImage2d);
InitBuiltinType(OCLImage2dArrayTy, BuiltinType::OCLImage2dArray);
+ InitBuiltinType(OCLImage2dDepthTy, BuiltinType::OCLImage2dDepth);
+ InitBuiltinType(OCLImage2dArrayDepthTy, BuiltinType::OCLImage2dArrayDepth);
+ InitBuiltinType(OCLImage2dMSAATy, BuiltinType::OCLImage2dMSAA);
+ InitBuiltinType(OCLImage2dArrayMSAATy, BuiltinType::OCLImage2dArrayMSAA);
+ InitBuiltinType(OCLImage2dMSAADepthTy, BuiltinType::OCLImage2dMSAADepth);
+ InitBuiltinType(OCLImage2dArrayMSAADepthTy,
+ BuiltinType::OCLImage2dArrayMSAADepth);
InitBuiltinType(OCLImage3dTy, BuiltinType::OCLImage3d);
InitBuiltinType(OCLSamplerTy, BuiltinType::OCLSampler);
InitBuiltinType(OCLEventTy, BuiltinType::OCLEvent);
+ InitBuiltinType(OCLClkEventTy, BuiltinType::OCLClkEvent);
+ InitBuiltinType(OCLQueueTy, BuiltinType::OCLQueue);
+ InitBuiltinType(OCLNDRangeTy, BuiltinType::OCLNDRange);
+ InitBuiltinType(OCLReserveIDTy, BuiltinType::OCLReserveID);
}
// Builtin type for __objc_yes and __objc_no
@@ -1629,11 +1640,21 @@
Align = Target->getIntAlign();
break;
case BuiltinType::OCLEvent:
+ case BuiltinType::OCLClkEvent:
+ case BuiltinType::OCLQueue:
+ case BuiltinType::OCLNDRange:
+ case BuiltinType::OCLReserveID:
case BuiltinType::OCLImage1d:
case BuiltinType::OCLImage1dArray:
case BuiltinType::OCLImage1dBuffer:
case BuiltinType::OCLImage2d:
case BuiltinType::OCLImage2dArray:
+ case BuiltinType::OCLImage2dDepth:
+ case BuiltinType::OCLImage2dArrayDepth:
+ case BuiltinType::OCLImage2dMSAA:
+ case BuiltinType::OCLImage2dArrayMSAA:
+ case BuiltinType::OCLImage2dMSAADepth:
+ case BuiltinType::OCLImage2dArrayMSAADepth:
case BuiltinType::OCLImage3d:
// Currently these types are pointers to opaque types.
Width = Target->getPointerWidth(0);
@@ -5303,8 +5324,18 @@
case BuiltinType::OCLImage1dBuffer:
case BuiltinType::OCLImage2d:
case BuiltinType::OCLImage2dArray:
+ case BuiltinType::OCLImage2dDepth:
+ case BuiltinType::OCLImage2dArrayDepth:
+ case BuiltinType::OCLImage2dMSAA:
+ case BuiltinType::OCLImage2dArrayMSAA:
+ case BuiltinType::OCLImage2dMSAADepth:
+ case BuiltinType::OCLImage2dArrayMSAADepth:
case BuiltinType::OCLImage3d:
case BuiltinType::OCLEvent:
+ case BuiltinType::OCLClkEvent:
+ case BuiltinType::OCLQueue:
+ case BuiltinType::OCLNDRange:
+ case BuiltinType::OCLReserveID:
case BuiltinType::OCLSampler:
case BuiltinType::Dependent:
#define BUILTIN_TYPE(KIND, ID)
Index: lib/AST/ItaniumMangle.cpp
===================================================================
--- lib/AST/ItaniumMangle.cpp (revision 239908)
+++ lib/AST/ItaniumMangle.cpp (working copy)
@@ -2031,9 +2031,23 @@
case BuiltinType::OCLImage1dBuffer: Out << "17ocl_image1dbuffer"; break;
case BuiltinType::OCLImage2d: Out << "11ocl_image2d"; break;
case BuiltinType::OCLImage2dArray: Out << "16ocl_image2darray"; break;
+ case BuiltinType::OCLImage2dDepth: Out << "16ocl_image2ddepth"; break;
+ case BuiltinType::OCLImage2dArrayDepth:
+ Out << "21ocl_image2darraydepth";
+ break;
+ case BuiltinType::OCLImage2dMSAA: Out << "15ocl_image2dmsaa"; break;
+ case BuiltinType::OCLImage2dArrayMSAA: Out << "20ocl_image2darraymsaa"; break;
+ case BuiltinType::OCLImage2dMSAADepth: Out << "20ocl_image2dmsaadepth"; break;
+ case BuiltinType::OCLImage2dArrayMSAADepth:
+ Out << "35ocl_image2darraymsaadepth";
+ break;
case BuiltinType::OCLImage3d: Out << "11ocl_image3d"; break;
case BuiltinType::OCLSampler: Out << "11ocl_sampler"; break;
case BuiltinType::OCLEvent: Out << "9ocl_event"; break;
+ case BuiltinType::OCLClkEvent: Out << "12ocl_clkevent"; break;
+ case BuiltinType::OCLQueue: Out << "9ocl_queue"; break;
+ case BuiltinType::OCLNDRange: Out << "11ocl_ndrange"; break;
+ case BuiltinType::OCLReserveID: Out << "13ocl_reserveid"; break;
}
}
Index: lib/AST/MicrosoftMangle.cpp
===================================================================
--- lib/AST/MicrosoftMangle.cpp (revision 239908)
+++ lib/AST/MicrosoftMangle.cpp (working copy)
@@ -1564,9 +1564,27 @@
case BuiltinType::OCLImage1dBuffer: Out << "PAUocl_image1dbuffer@@"; break;
case BuiltinType::OCLImage2d: Out << "PAUocl_image2d@@"; break;
case BuiltinType::OCLImage2dArray: Out << "PAUocl_image2darray@@"; break;
+ case BuiltinType::OCLImage2dDepth: Out << "PAUocl_image2ddepth@@"; break;
+ case BuiltinType::OCLImage2dArrayDepth:
+ Out << "PAUocl_image2darraydepth@@";
+ break;
+ case BuiltinType::OCLImage2dMSAA: Out << "PAUocl_image2dmsaa@@"; break;
+ case BuiltinType::OCLImage2dArrayMSAA:
+ Out << "PAUocl_image2darraymsaa@@";
+ break;
+ case BuiltinType::OCLImage2dMSAADepth:
+ Out << "PAUocl_image2dmsaadepth@@";
+ break;
+ case BuiltinType::OCLImage2dArrayMSAADepth:
+ Out << "PAUocl_image2darraymsaadepth@@";
+ break;
case BuiltinType::OCLImage3d: Out << "PAUocl_image3d@@"; break;
case BuiltinType::OCLSampler: Out << "PAUocl_sampler@@"; break;
case BuiltinType::OCLEvent: Out << "PAUocl_event@@"; break;
+ case BuiltinType::OCLClkEvent: Out << "PAUocl_clkevent@@"; break;
+ case BuiltinType::OCLQueue: Out << "PAUocl_queue@@"; break;
+ case BuiltinType::OCLNDRange: Out << "PAUocl_ndrange@@"; break;
+ case BuiltinType::OCLReserveID: Out << "PAUocl_reserveid@@"; break;
case BuiltinType::NullPtr: Out << "$$T"; break;
Index: lib/AST/NSAPI.cpp
===================================================================
--- lib/AST/NSAPI.cpp (revision 239908)
+++ lib/AST/NSAPI.cpp (working copy)
@@ -449,9 +449,19 @@
case BuiltinType::OCLImage1dBuffer:
case BuiltinType::OCLImage2d:
case BuiltinType::OCLImage2dArray:
+ case BuiltinType::OCLImage2dDepth:
+ case BuiltinType::OCLImage2dArrayDepth:
+ case BuiltinType::OCLImage2dMSAA:
+ case BuiltinType::OCLImage2dArrayMSAA:
+ case BuiltinType::OCLImage2dMSAADepth:
+ case BuiltinType::OCLImage2dArrayMSAADepth:
case BuiltinType::OCLImage3d:
case BuiltinType::OCLSampler:
case BuiltinType::OCLEvent:
+ case BuiltinType::OCLClkEvent:
+ case BuiltinType::OCLQueue:
+ case BuiltinType::OCLNDRange:
+ case BuiltinType::OCLReserveID:
case BuiltinType::BoundMember:
case BuiltinType::Dependent:
case BuiltinType::Overload:
Index: lib/AST/Type.cpp
===================================================================
--- lib/AST/Type.cpp (revision 239908)
+++ lib/AST/Type.cpp (working copy)
@@ -1543,9 +1543,19 @@
case OCLImage1dBuffer: return "image1d_buffer_t";
case OCLImage2d: return "image2d_t";
case OCLImage2dArray: return "image2d_array_t";
+ case OCLImage2dDepth: return "image2d_depth_t";
+ case OCLImage2dArrayDepth: return "image2d_array_depth_t";
+ case OCLImage2dMSAA: return "image2d_msaa_t";
+ case OCLImage2dArrayMSAA: return "image2d_array_msaa_t";
+ case OCLImage2dMSAADepth: return "image2d_msaa_depth_t";
+ case OCLImage2dArrayMSAADepth: return "image2d_array_msaa_depth_t";
case OCLImage3d: return "image3d_t";
case OCLSampler: return "sampler_t";
case OCLEvent: return "event_t";
+ case OCLClkEvent: return "clk_event_t";
+ case OCLQueue: return "queue_t";
+ case OCLNDRange: return "event_t";
+ case OCLReserveID: return "reserve_id_t";
}
llvm_unreachable("Invalid builtin type.");
Index: lib/AST/TypeLoc.cpp
===================================================================
--- lib/AST/TypeLoc.cpp (revision 239908)
+++ lib/AST/TypeLoc.cpp (working copy)
@@ -296,9 +296,19 @@
case BuiltinType::OCLImage1dBuffer:
case BuiltinType::OCLImage2d:
case BuiltinType::OCLImage2dArray:
+ case BuiltinType::OCLImage2dDepth:
+ case BuiltinType::OCLImage2dArrayDepth:
+ case BuiltinType::OCLImage2dMSAA:
+ case BuiltinType::OCLImage2dArrayMSAA:
+ case BuiltinType::OCLImage2dMSAADepth:
+ case BuiltinType::OCLImage2dArrayMSAADepth:
case BuiltinType::OCLImage3d:
case BuiltinType::OCLSampler:
case BuiltinType::OCLEvent:
+ case BuiltinType::OCLClkEvent:
+ case BuiltinType::OCLQueue:
+ case BuiltinType::OCLNDRange:
+ case BuiltinType::OCLReserveID:
case BuiltinType::BuiltinFn:
return TST_unspecified;
}
Index: lib/CodeGen/CGDebugInfo.cpp
===================================================================
--- lib/CodeGen/CGDebugInfo.cpp (revision 239908)
+++ lib/CodeGen/CGDebugInfo.cpp (working copy)
@@ -453,6 +453,24 @@
case BuiltinType::OCLImage2dArray:
return getOrCreateStructPtrType("opencl_image2d_array_t",
OCLImage2dArrayDITy);
+ case BuiltinType::OCLImage2dDepth:
+ return getOrCreateStructPtrType("opencl_image2d_depth_t",
+ OCLImage2dDepthDITy);
+ case BuiltinType::OCLImage2dArrayDepth:
+ return getOrCreateStructPtrType("opencl_image2d_array_depth_t",
+ OCLImage2dArrayDepthDITy);
+ case BuiltinType::OCLImage2dMSAA:
+ return getOrCreateStructPtrType("opencl_image2d_msaa_t",
+ OCLImage2dMSAADITy);
+ case BuiltinType::OCLImage2dArrayMSAA:
+ return getOrCreateStructPtrType("opencl_image2d_array_msaa_t",
+ OCLImage2dArrayMSAADITy);
+ case BuiltinType::OCLImage2dMSAADepth:
+ return getOrCreateStructPtrType("opencl_image2d_msaa_depth_t",
+ OCLImage2dMSAADepthDITy);
+ case BuiltinType::OCLImage2dArrayMSAADepth:
+ return getOrCreateStructPtrType("opencl_image2d_array_msaa_depth_t",
+ OCLImage2dArrayMSAADepthDITy);
case BuiltinType::OCLImage3d:
return getOrCreateStructPtrType("opencl_image3d_t", OCLImage3dDITy);
case BuiltinType::OCLSampler:
@@ -461,6 +479,14 @@
CGM.getContext().getTypeAlign(BT), llvm::dwarf::DW_ATE_unsigned);
case BuiltinType::OCLEvent:
return getOrCreateStructPtrType("opencl_event_t", OCLEventDITy);
+ case BuiltinType::OCLClkEvent:
+ return getOrCreateStructPtrType("opencl_clk_event_t", OCLClkEventDITy);
+ case BuiltinType::OCLQueue:
+ return getOrCreateStructPtrType("opencl_queue_t", OCLQueueDITy);
+ case BuiltinType::OCLNDRange:
+ return getOrCreateStructPtrType("opencl_ndrange_t", OCLNDRangeDITy);
+ case BuiltinType::OCLReserveID:
+ return getOrCreateStructPtrType("opencl_reserve_id_t", OCLReserveIDDITy);
case BuiltinType::UChar:
case BuiltinType::Char_U:
Index: lib/CodeGen/CGDebugInfo.h
===================================================================
--- lib/CodeGen/CGDebugInfo.h (revision 239908)
+++ lib/CodeGen/CGDebugInfo.h (working copy)
@@ -63,8 +63,18 @@
llvm::DIType *OCLImage1dBufferDITy = nullptr;
llvm::DIType *OCLImage2dDITy = nullptr;
llvm::DIType *OCLImage2dArrayDITy = nullptr;
+ llvm::DIType *OCLImage2dDepthDITy = nullptr;
+ llvm::DIType *OCLImage2dArrayDepthDITy = nullptr;
+ llvm::DIType *OCLImage2dMSAADITy = nullptr;
+ llvm::DIType *OCLImage2dArrayMSAADITy = nullptr;
+ llvm::DIType *OCLImage2dMSAADepthDITy = nullptr;
+ llvm::DIType *OCLImage2dArrayMSAADepthDITy = nullptr;
llvm::DIType *OCLImage3dDITy = nullptr;
llvm::DIType *OCLEventDITy = nullptr;
+ llvm::DIType *OCLClkEventDITy = nullptr;
+ llvm::DIType *OCLQueueDITy = nullptr;
+ llvm::DIType *OCLNDRangeDITy = nullptr;
+ llvm::DIType *OCLReserveIDDITy = nullptr;
llvm::DIType *BlockLiteralGeneric = nullptr;
/// \brief Cache of previously constructed Types.
Index: lib/CodeGen/CGOpenCLRuntime.cpp
===================================================================
--- lib/CodeGen/CGOpenCLRuntime.cpp (revision 239908)
+++ lib/CodeGen/CGOpenCLRuntime.cpp (working copy)
@@ -55,6 +55,28 @@
case BuiltinType::OCLImage2dArray:
return llvm::PointerType::get(llvm::StructType::create(
Ctx, "opencl.image2d_array_t"), ImgAddrSpc);
+ case BuiltinType::OCLImage2dDepth:
+ return llvm::PointerType::get(llvm::StructType::create(
+ Ctx, "opencl.image2d_depth_t"), ImgAddrSpc);
+ case BuiltinType::OCLImage2dArrayDepth:
+ return llvm::PointerType::get(llvm::StructType::create(
+ Ctx, "opencl.image2d_array_depth_t"),
+ ImgAddrSpc);
+ case BuiltinType::OCLImage2dMSAA:
+ return llvm::PointerType::get(llvm::StructType::create(
+ Ctx, "opencl.image2d_msaa_t"), ImgAddrSpc);
+ case BuiltinType::OCLImage2dArrayMSAA:
+ return llvm::PointerType::get(llvm::StructType::create(
+ Ctx, "opencl.image2d_array_msaa_t"),
+ ImgAddrSpc);
+ case BuiltinType::OCLImage2dMSAADepth:
+ return llvm::PointerType::get(llvm::StructType::create(
+ Ctx, "opencl.image2d_msaa_depth_t"),
+ ImgAddrSpc);
+ case BuiltinType::OCLImage2dArrayMSAADepth:
+ return llvm::PointerType::get(llvm::StructType::create(
+ Ctx, "opencl.image2d_array_msaa_depth_t"),
+ ImgAddrSpc);
case BuiltinType::OCLImage3d:
return llvm::PointerType::get(llvm::StructType::create(
Ctx, "opencl.image3d_t"), ImgAddrSpc);
@@ -63,5 +85,17 @@
case BuiltinType::OCLEvent:
return llvm::PointerType::get(llvm::StructType::create(
Ctx, "opencl.event_t"), 0);
+ case BuiltinType::OCLClkEvent:
+ return llvm::PointerType::get(llvm::StructType::create(
+ Ctx, "opencl.clk_event_t"), 0);
+ case BuiltinType::OCLQueue:
+ return llvm::PointerType::get(llvm::StructType::create(
+ Ctx, "opencl.queue_t"), 0);
+ case BuiltinType::OCLNDRange:
+ return llvm::PointerType::get(llvm::StructType::create(
+ Ctx, "opencl.ndrange_t"), 0);
+ case BuiltinType::OCLReserveID:
+ return llvm::PointerType::get(llvm::StructType::create(
+ Ctx, "opencl.reserve_id_t"), 0);
}
}
Index: lib/CodeGen/CodeGenTypes.cpp
===================================================================
--- lib/CodeGen/CodeGenTypes.cpp (revision 239908)
+++ lib/CodeGen/CodeGenTypes.cpp (working copy)
@@ -387,9 +387,19 @@
case BuiltinType::OCLImage1dBuffer:
case BuiltinType::OCLImage2d:
case BuiltinType::OCLImage2dArray:
+ case BuiltinType::OCLImage2dDepth:
+ case BuiltinType::OCLImage2dArrayDepth:
+ case BuiltinType::OCLImage2dMSAA:
+ case BuiltinType::OCLImage2dArrayMSAA:
+ case BuiltinType::OCLImage2dMSAADepth:
+ case BuiltinType::OCLImage2dArrayMSAADepth:
case BuiltinType::OCLImage3d:
case BuiltinType::OCLSampler:
case BuiltinType::OCLEvent:
+ case BuiltinType::OCLClkEvent:
+ case BuiltinType::OCLQueue:
+ case BuiltinType::OCLNDRange:
+ case BuiltinType::OCLReserveID:
ResultType = CGM.getOpenCLRuntime().convertOpenCLSpecificType(Ty);
break;
Index: lib/CodeGen/ItaniumCXXABI.cpp
===================================================================
--- lib/CodeGen/ItaniumCXXABI.cpp (revision 239908)
+++ lib/CodeGen/ItaniumCXXABI.cpp (working copy)
@@ -2341,9 +2341,19 @@
case BuiltinType::OCLImage1dBuffer:
case BuiltinType::OCLImage2d:
case BuiltinType::OCLImage2dArray:
+ case BuiltinType::OCLImage2dDepth:
+ case BuiltinType::OCLImage2dArrayDepth:
+ case BuiltinType::OCLImage2dMSAA:
+ case BuiltinType::OCLImage2dArrayMSAA:
+ case BuiltinType::OCLImage2dMSAADepth:
+ case BuiltinType::OCLImage2dArrayMSAADepth:
case BuiltinType::OCLImage3d:
case BuiltinType::OCLSampler:
case BuiltinType::OCLEvent:
+ case BuiltinType::OCLClkEvent:
+ case BuiltinType::OCLQueue:
+ case BuiltinType::OCLNDRange:
+ case BuiltinType::OCLReserveID:
return true;
case BuiltinType::Dependent:
Index: lib/Index/USRGeneration.cpp
===================================================================
--- lib/Index/USRGeneration.cpp (revision 239908)
+++ lib/Index/USRGeneration.cpp (working copy)
@@ -613,8 +613,18 @@
case BuiltinType::OCLImage1dBuffer:
case BuiltinType::OCLImage2d:
case BuiltinType::OCLImage2dArray:
+ case BuiltinType::OCLImage2dDepth:
+ case BuiltinType::OCLImage2dArrayDepth:
+ case BuiltinType::OCLImage2dMSAA:
+ case BuiltinType::OCLImage2dArrayMSAA:
+ case BuiltinType::OCLImage2dMSAADepth:
+ case BuiltinType::OCLImage2dArrayMSAADepth:
case BuiltinType::OCLImage3d:
case BuiltinType::OCLEvent:
+ case BuiltinType::OCLClkEvent:
+ case BuiltinType::OCLQueue:
+ case BuiltinType::OCLNDRange:
+ case BuiltinType::OCLReserveID:
case BuiltinType::OCLSampler:
IgnoreResults = true;
return;
Index: lib/Sema/Sema.cpp
===================================================================
--- lib/Sema/Sema.cpp (revision 239908)
+++ lib/Sema/Sema.cpp (working copy)
@@ -214,6 +214,16 @@
addImplicitTypedef("sampler_t", Context.OCLSamplerTy);
addImplicitTypedef("event_t", Context.OCLEventTy);
if (getLangOpts().OpenCLVersion >= 200) {
+ addImplicitTypedef("image2d_depth_t", Context.OCLImage2dDepthTy);
+ addImplicitTypedef("image2d_array_depth_t", Context.OCLImage2dArrayDepthTy);
+ addImplicitTypedef("image2d_msaa_t", Context.OCLImage2dMSAATy);
+ addImplicitTypedef("image2d_array_msaa_t", Context.OCLImage2dArrayMSAATy);
+ addImplicitTypedef("image2d_msaa_depth_t", Context.OCLImage2dMSAADepthTy);
+ addImplicitTypedef("image2d_array_msaa_depth_t", Context.OCLImage2dArrayMSAADepthTy);
+ addImplicitTypedef("clk_event_t", Context.OCLClkEventTy);
+ addImplicitTypedef("queue_t", Context.OCLQueueTy);
+ addImplicitTypedef("ndrange_t", Context.OCLNDRangeTy);
+ addImplicitTypedef("reserve_id_t", Context.OCLReserveIDTy);
addImplicitTypedef("atomic_int", Context.getAtomicType(Context.IntTy));
addImplicitTypedef("atomic_uint",
Context.getAtomicType(Context.UnsignedIntTy));
Index: lib/Sema/SemaType.cpp
===================================================================
--- lib/Sema/SemaType.cpp (revision 239908)
+++ lib/Sema/SemaType.cpp (working copy)
@@ -996,6 +996,13 @@
<< Result << "cl_khr_fp64";
declarator.setInvalidType(true);
}
+ } else if (!S.getOpenCLOptions().cl_khr_gl_msaa_sharing &&
+ (Result->isImage2dMSAAT() || Result->isImage2dArrayMSAAT() ||
+ Result->isImage2dArrayMSAATDepth() ||
+ Result->isImage2dMSAATDepth())) {
+ S.Diag(DS.getTypeSpecTypeLoc(), diag::err_type_requires_extension)
+ << Result << "cl_khr_gl_msaa_sharing";
+ declarator.setInvalidType(true);
}
}
Index: lib/Serialization/ASTCommon.cpp
===================================================================
--- lib/Serialization/ASTCommon.cpp (revision 239908)
+++ lib/Serialization/ASTCommon.cpp (working copy)
@@ -67,9 +67,19 @@
case BuiltinType::OCLImage1dBuffer: ID = PREDEF_TYPE_IMAGE1D_BUFF_ID; break;
case BuiltinType::OCLImage2d: ID = PREDEF_TYPE_IMAGE2D_ID; break;
case BuiltinType::OCLImage2dArray: ID = PREDEF_TYPE_IMAGE2D_ARR_ID; break;
+ case BuiltinType::OCLImage2dDepth: ID = PREDEF_TYPE_IMAGE2D_DEP_ID; break;
+ case BuiltinType::OCLImage2dArrayDepth: ID = PREDEF_TYPE_IMAGE2D_ARR_DEP_ID; break;
+ case BuiltinType::OCLImage2dMSAA: ID = PREDEF_TYPE_IMAGE2D_MSAA_ID; break;
+ case BuiltinType::OCLImage2dArrayMSAA: ID = PREDEF_TYPE_IMAGE2D_ARR_MSAA_ID; break;
+ case BuiltinType::OCLImage2dMSAADepth: ID = PREDEF_TYPE_IMAGE2D_MSAA_DEP_ID; break;
+ case BuiltinType::OCLImage2dArrayMSAADepth: ID = PREDEF_TYPE_IMAGE2D_ARR_MSAA_DEPTH_ID; break;
case BuiltinType::OCLImage3d: ID = PREDEF_TYPE_IMAGE3D_ID; break;
case BuiltinType::OCLSampler: ID = PREDEF_TYPE_SAMPLER_ID; break;
case BuiltinType::OCLEvent: ID = PREDEF_TYPE_EVENT_ID; break;
+ case BuiltinType::OCLClkEvent: ID = PREDEF_TYPE_CLK_EVENT_ID; break;
+ case BuiltinType::OCLQueue: ID = PREDEF_TYPE_QUEUE_ID; break;
+ case BuiltinType::OCLNDRange: ID = PREDEF_TYPE_NDRANGE_ID; break;
+ case BuiltinType::OCLReserveID: ID = PREDEF_TYPE_RESERVE_ID_ID; break;
case BuiltinType::BuiltinFn:
ID = PREDEF_TYPE_BUILTIN_FN; break;
Index: lib/Serialization/ASTReader.cpp
===================================================================
--- lib/Serialization/ASTReader.cpp (revision 239908)
+++ lib/Serialization/ASTReader.cpp (working copy)
@@ -5716,9 +5716,19 @@
case PREDEF_TYPE_IMAGE1D_BUFF_ID: T = Context.OCLImage1dBufferTy; break;
case PREDEF_TYPE_IMAGE2D_ID: T = Context.OCLImage2dTy; break;
case PREDEF_TYPE_IMAGE2D_ARR_ID: T = Context.OCLImage2dArrayTy; break;
+ case PREDEF_TYPE_IMAGE2D_DEP_ID: T = Context.OCLImage2dDepthTy; break;
+ case PREDEF_TYPE_IMAGE2D_ARR_DEP_ID: T = Context.OCLImage2dArrayDepthTy; break;
+ case PREDEF_TYPE_IMAGE2D_MSAA_ID: T = Context.OCLImage2dMSAATy; break;
+ case PREDEF_TYPE_IMAGE2D_ARR_MSAA_ID: T = Context.OCLImage2dArrayMSAATy; break;
+ case PREDEF_TYPE_IMAGE2D_MSAA_DEP_ID: T = Context.OCLImage2dMSAADepthTy; break;
+ case PREDEF_TYPE_IMAGE2D_ARR_MSAA_DEPTH_ID: T = Context.OCLImage2dArrayMSAADepthTy; break;
case PREDEF_TYPE_IMAGE3D_ID: T = Context.OCLImage3dTy; break;
case PREDEF_TYPE_SAMPLER_ID: T = Context.OCLSamplerTy; break;
case PREDEF_TYPE_EVENT_ID: T = Context.OCLEventTy; break;
+ case PREDEF_TYPE_CLK_EVENT_ID: T = Context.OCLClkEventTy; break;
+ case PREDEF_TYPE_QUEUE_ID: T = Context.OCLQueueTy; break;
+ case PREDEF_TYPE_NDRANGE_ID: T = Context.OCLNDRangeTy; break;
+ case PREDEF_TYPE_RESERVE_ID_ID: T = Context.OCLReserveIDTy; break;
case PREDEF_TYPE_AUTO_DEDUCT: T = Context.getAutoDeductType(); break;
case PREDEF_TYPE_AUTO_RREF_DEDUCT:
Index: test/CodeGenOpenCL/opencl_20_types.cl
===================================================================
--- test/CodeGenOpenCL/opencl_20_types.cl (revision 0)
+++ test/CodeGenOpenCL/opencl_20_types.cl (working copy)
@@ -0,0 +1,32 @@
+// RUN: %clang_cc1 %s -emit-llvm -cl-std=CL2.0 -o - -O0 | FileCheck %s
+
+void fnc2depth(image2d_depth_t img) {}
+// CHECK: @fnc2depth(%opencl.image2d_depth_t*
+
+void fnc2arraydepth(image2d_array_depth_t img) {}
+// CHECK: @fnc2arraydepth(%opencl.image2d_array_depth_t*
+
+#pragma OPENCL EXTENSION cl_khr_gl_msaa_sharing : enable
+
+void fnc2msaa(image2d_msaa_t img) {}
+// CHECK: @fnc2msaa(%opencl.image2d_msaa_t*
+
+void fnc2arraymsaa(image2d_array_msaa_t img) {}
+// CHECK: @fnc2arraymsaa(%opencl.image2d_array_msaa_t*
+
+void fnc2msaadepth(image2d_msaa_depth_t img) {}
+// CHECK: @fnc2msaadepth(%opencl.image2d_msaa_depth_t*
+
+void fnc2arraymsaadepth(image2d_array_msaa_depth_t img) {}
+// CHECK: @fnc2arraymsaadepth(%opencl.image2d_array_msaa_depth_t*
+
+kernel void other_types(image2d_array_msaa_depth_t img) {
+ clk_event_t clevt;
+// CHECK: alloca %opencl.clk_event_t*
+ queue_t q;
+// CHECK: alloca %opencl.queue_t*
+ ndrange_t range;
+// CHECK: alloca %opencl.ndrange_t*
+ reserve_id_t res;
+// CHECK: alloca %opencl.reserve_id_t*
+}
Index: test/PCH/ocl_types.h
===================================================================
--- test/PCH/ocl_types.h (revision 239908)
+++ test/PCH/ocl_types.h (working copy)
@@ -23,3 +23,37 @@
// event_t
typedef event_t evt_t;
+
+#if __OPENCL_VERSION__ >= 200
+
+// clk_event_t
+typedef clk_event_t clkevt_t;
+
+// queue_t
+typedef queue_t q_t;
+
+// ndrange_t
+typedef ndrange_t range_t;
+
+// reserve_id_t
+typedef reserve_id_t reserveid_t;
+
+// image2d_depth_t
+typedef image2d_depth_t img2ddep_t;
+
+// image2d_array_depth_t
+typedef image2d_array_depth_t img2darr_dep_t;
+
+// image2d_msaa_t
+typedef image2d_msaa_t img2dmsaa_t;
+
+// image2d_array_msaa_t
+typedef image2d_array_msaa_t img2darrmsaa_t;
+
+// image2d_msaa_depth_t
+typedef image2d_msaa_depth_t img2dmsaadep_t;
+
+// image2d_array_msaa_depth_t
+typedef image2d_array_msaa_depth_t img2darrmsaadep_t;
+
+#endif
Index: test/SemaOpenCL/msaa_types.cl
===================================================================
--- test/SemaOpenCL/msaa_types.cl (revision 0)
+++ test/SemaOpenCL/msaa_types.cl (working copy)
@@ -0,0 +1,19 @@
+// RUN: %clang_cc1 %s -cl-std=CL2.0 -verify -pedantic -fsyntax-only -Wno-unused-value
+
+#pragma OPENCL EXTENSION cl_khr_gl_msaa_sharing : disable
+
+void half_disabled(image2d_msaa_t one, // expected-error{{use of type 'image2d_msaa_t' requires cl_khr_gl_msaa_sharing extension to be enabled}}
+ image2d_array_msaa_t two, // expected-error{{use of type 'image2d_array_msaa_t' requires cl_khr_gl_msaa_sharing extension to be enabled}}
+ image2d_msaa_depth_t three, // expected-error{{use of type 'image2d_msaa_depth_t' requires cl_khr_gl_msaa_sharing extension to be enabled}}
+ image2d_array_msaa_depth_t four) // expected-error{{use of type 'image2d_array_msaa_depth_t' requires cl_khr_gl_msaa_sharing extension to be enabled}}
+{
+
+}
+
+// Exactly the same as above but with the cl_khr_gl_msaa_sharing extension enabled.
+#pragma OPENCL EXTENSION cl_khr_gl_msaa_sharing : enable
+void msaa_enabled(image2d_msaa_t one, image2d_array_msaa_t two,
+ image2d_msaa_depth_t three, image2d_array_msaa_depth_t four)
+{
+
+}
Index: tools/libclang/CIndex.cpp
===================================================================
--- tools/libclang/CIndex.cpp (revision 239908)
+++ tools/libclang/CIndex.cpp (working copy)
@@ -1423,9 +1423,19 @@
case BuiltinType::OCLImage1dBuffer:
case BuiltinType::OCLImage2d:
case BuiltinType::OCLImage2dArray:
+ case BuiltinType::OCLImage2dDepth:
+ case BuiltinType::OCLImage2dArrayDepth:
+ case BuiltinType::OCLImage2dMSAA:
+ case BuiltinType::OCLImage2dArrayMSAA:
+ case BuiltinType::OCLImage2dMSAADepth:
+ case BuiltinType::OCLImage2dArrayMSAADepth:
case BuiltinType::OCLImage3d:
case BuiltinType::OCLSampler:
case BuiltinType::OCLEvent:
+ case BuiltinType::OCLClkEvent:
+ case BuiltinType::OCLQueue:
+ case BuiltinType::OCLNDRange:
+ case BuiltinType::OCLReserveID:
#define BUILTIN_TYPE(Id, SingletonId)
#define SIGNED_TYPE(Id, SingletonId) case BuiltinType::Id:
#define UNSIGNED_TYPE(Id, SingletonId) case BuiltinType::Id:
_______________________________________________
cfe-commits mailing list
cfe-commits@cs.uiuc.edu
http://lists.cs.uiuc.edu/mailman/listinfo/cfe-commits
