Tony,

Thanks, followed these instructions and saw this (so I know it's the updated
version) Setting up cherokee-admin (1.2.2-1~lucid~ppa1) ...

I still get the error in the previous message.

I've checked the (ve) settings and I should have sufficient room for theads
~256 so that shouldn't be the issue.

One thing is once I install Cherokee and it starts on the server my memory
jumps up to around 160% of my allotment. 0.9 did that as well, but I could
run the admin and change the number of Threads in the advance to 3 which
brought it down to around 25%.

On Wed, Apr 20, 2011 at 8:13 PM, Tony Zakula <[email protected]> wrote:

> Hi,
>
> See below.
>
> On Wed, Apr 20, 2011 at 7:07 PM, Christopher McComas <
> [email protected]> wrote:
>
>> Thanks Tony that makes sense.
>>
>> I didn't have anything of consequence on the server yet, so I just wiped
>> it clean back to just the original Ubuntu 10.10 OS. Just to clarify I'd do:
>>
>> apt-get update
>> apt-get upgrade
>>
>> apt-get install python-software-properties
>>
>> add-apt-repository ppa:cherokee-webserver
>>
>
> I do not have my notes with me, but usually, I have to do something like sudo
> apt-get dist-upgrade here to make sure Ubuntu pulls version 1.2
>
>
>>
>> apt-get install cherokee
>>
>> ...then get the modules for mod-mysql mod-rrd etc.
>>
>> That should do it? I'm getting ready to attempt it.
>
>
> Hopefully that does it.
>
>>
>>
>>
>>
>> On Wed, Apr 20, 2011 at 7:58 PM, Tony Zakula <[email protected]>wrote:
>>
>>> When you install the latest version and you have had an older version
>>> installed, you need to make sure the old admin is not installed.  I think it
>>> is something like lib-cherokee-admin and the new admin package is
>>> cherokee-admin.  I had issues with that on a few Ubuntu servers.  Does that
>>> make sense?  Check your packages.
>>>
>>> Tony Z
>>>
>>>
>>>
>>> On Wed, Apr 20, 2011 at 6:51 PM, Christopher McComas <
>>> [email protected]> wrote:
>>>
>>>> I had installed 1.2.2 on my MediaTemple (ve) but when I had it installed
>>>> I got this error and could not figure out a solution for it:
>>>>
>>>> In SHH when I try to start the admin, with Cherokee running I get this
>>>> error:
>>>>
>>>> [20/04/2011 13:02:20.879] (error) thread.c:247 - Could not create a system
>>>>     thread: 'Resource temporarily unavailable' | This is a extremely 
>>>> unusual
>>>> error. For some reason
>>>>     your system could not create a thread while launching the server. You
>>>> might
>>>>     have hit some system restriction.
>>>>
>>>> [20/04/2011 13:02:20.879] (critical) server.c:660 - Could not create an
>>>>     internal server thread | This is a extremely unusual error. For some
>>>> reason
>>>>     the server could not create a thread while launching the server.
>>>>
>>>> When I run the service cherokee stop command, then run cherokee-admin -b I
>>>> get this:
>>>>
>>>>
>>>> Login:
>>>>   User:              admin
>>>>   One-time Password: N1YK9hGn8oveeJXS
>>>>
>>>> Web Interface:
>>>>   URL:               http://localhost:9090/
>>>>
>>>>
>>>> When I go to that I get the login prompt, I enter the information and then
>>>> just got a 503 error.
>>>>
>>>>
>>>>
>>>> On Wed, Apr 20, 2011 at 7:47 PM, Tony Zakula <[email protected]>wrote:
>>>>
>>>>> You will be miles ahead if you go to the Cherokee site and upgrade to
>>>>> the latest version using the PPA.  Look under install in the docs.  On
>>>>> Ubuntu, you may have to do a dist upgrade after installing the PPA.  It 
>>>>> will
>>>>> be easier to answer your questions, and you will have the latest version
>>>>> which has lots of bug fixes and improvements.
>>>>>
>>>>> Tony Z
>>>>>
>>>>>
>>>>> On Wed, Apr 20, 2011 at 6:43 PM, Christopher McComas <
>>>>> [email protected]> wrote:
>>>>>
>>>>>> I'm running Cherokee 0.99.39 on Ubuntu 10.10 with MediaTemple's 512MB
>>>>>> (ve).
>>>>>>
>>>>>> I have WordPress 3.1.1 up and running on my default Virtual Server at
>>>>>> mydomain.com. What I am trying to do is setup a phpBB3 install on the
>>>>>> same domain at mydomain.com/forums/.
>>>>>>
>>>>>> I tried to go to Virtual Servers > default > Wizards > Misc > phpBB3
>>>>>> and enter this information...
>>>>>>
>>>>>> Web Directory: /forums
>>>>>> Source Directory: /var/www/phpBB3
>>>>>>
>>>>>> It sets up the behavior as a Regular Expression rule type with this as
>>>>>> the Regular Expression:
>>>>>>
>>>>>>
>>>>>> ^/forums/(config.php|common.php|cache/.*|files/.*|images/avatars/upload/.*|store/.*)
>>>>>>
>>>>>> The Handler is set to HTTP error and the error is 403 Forbidden
>>>>>>
>>>>>> I thought this was wrong (I actually looked and it loaded the
>>>>>> WordPress Page Not found default), so I change it do Rule: Directory
>>>>>> pointing to /forums and Handler: None with Document Root to 
>>>>>> /var/www/phpBB3
>>>>>> and did a graceful restart and I got a 405 Method Not Allowed error. I
>>>>>> created Behavior's for /phpBB3/adm/images and /phpBB3/adm/styles and got 
>>>>>> it
>>>>>> setup and the Administration Control Panel works, with images, css, js. 
>>>>>> But
>>>>>> when I go to mydomain.com/forums I get a 405 Method Not Allowed
>>>>>> again. Do I have to go in manually and figure out which directories I 
>>>>>> need
>>>>>> to create a Behavior for, or is there an easier way to do it?
>>>>>>
>>>>>> _______________________________________________
>>>>>> Cherokee mailing list
>>>>>> [email protected]
>>>>>> http://lists.octality.com/listinfo/cherokee
>>>>>>
>>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Cherokee mailing list
>>>> [email protected]
>>>> http://lists.octality.com/listinfo/cherokee
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Cherokee mailing list
>>> [email protected]
>>> http://lists.octality.com/listinfo/cherokee
>>>
>>>
>>
>> _______________________________________________
>> Cherokee mailing list
>> [email protected]
>> http://lists.octality.com/listinfo/cherokee
>>
>>
>
> _______________________________________________
> Cherokee mailing list
> [email protected]
> http://lists.octality.com/listinfo/cherokee
>
>
_______________________________________________
Cherokee mailing list
[email protected]
http://lists.octality.com/listinfo/cherokee

Reply via email to