Replies to this message are sent to The Chevelle Mailing List
------------------------------------------------------------
In a message dated 08/06/2001 3:57:46 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
> My 67 big block is 2'' thick. Not sure if it is original but it has
Harrison
> stamped on top. Maybe some one
> here will know if it's original. I will say that it works really well.
It
> does not have the shroud and the
> car always runs at about 180-190. I have a 67 Camero with a 3 row HE
that
> I had built especially for the
> car and with a shroud and factory fan abd electric fan I still can't run
the
> air in traffic or it'll go to
> 230....go figure.
>
The generic Griffin Chevy aluminum radiator I have (26"x19") is 3.25" thick
at its deepest point (sides). Dunno about the 'original replacement' AL
radiators that Griffin or Be Cool sells. Most AL radiators that I have seen
have a couple of rows of 1" tubing in them so I would say 2" is a minimum.
HTH
Kurt
---------------------
Kurt Ehrhardt
ACES #1280
66 Malibu
66 SuperSport
Enfield, CT
-----------------------------------------------------
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]
