Replies to this message are sent to The Chevelle Mailing List
------------------------------------------------------------
Ken,
Edelbrock makes heat isolation spacers for their carbs. There are two
different types, depending on which style of manifold you have, single or
dual plane, and the kit come with longer carbs studs. I put one on my car
and as always, Edelbrock stuff fits as it should. The spacer is about 1/4"
thick, made of some composite insulating material, with metal grommets at
the stud locations. They are available from Jegs, Summit, etc., If you need
the part numbers I can look them up for you.
Bob
----- Original Message -----
From: "Ken's Email" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, August 16, 2001 8:58 AM
Subject: [Chevelle-List] Fuel Vapor Lock Fix ?= 67 Chevelle SS
>
> Replies to this message are sent to The Chevelle Mailing List
> ------------------------------------------------------------
>
> I recently placed a new Edelbrock Carb on the 67
> Chevelle SS with 396/325 hp. Starts great. When I ran
> it the other day and then stopped to refill at gas
> station, the Chevelle would not start. I had to wait
> for half hour. I believe it is fuel vapor lock.
> Solutions to this, i.e., move fule line or place
> something over fuel line ?
>
> Thanks,
>
> Ken McD...
>
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute with Yahoo! Messenger
> http://phonecard.yahoo.com/
>
> -----------------------------------------------------
> To Unsubscribe please visit www.chevelles.net/list.html
> To start a new topic, send mail to: [EMAIL PROTECTED]
-----------------------------------------------------
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]
