Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
george You will find specific info in an assembly manual. My 72 shows both bolts are front to rear install. & torqued to 70-90 ft/lb. Also ball joints show upper 40-60 & lower 70-90. Notes to both add : do not back off nut to align cotter key. But again 66 may be different. rick On Sun, 28 Oct 2001 21:23:52 -0700 GKI <[EMAIL PROTECTED]> writes: > > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > Anybody have torque numbers for upper and lower ball joints > for my 1966 ElCamino? Also need torque numbers for the lower > front control arm bolts that attach arms to frame. > > These grade 8 bolts have a shoulder just below the head, does > this require them to go in a certain way? Both heads on front > side of arm? Both heads on out side of arm? Or maybe both with > the nuts on the outside of the arms? > Maybe it doesn't matter. > Any help? > > Thanks, > > George > -- > CLick on next line to: > MAILTO:[EMAIL PROTECTED] > Netzone & Goodnet address CLOSED > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
