Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
I installed headers and duals on my '72 MC w/ 350 2-bbl without adjusting the carb at all and it ran fine. I drove it that way for over a year before installing a 4-bbl. ----- Original Message ----- From: Hambright, James <[EMAIL PROTECTED]> To: Chevelle List (E-mail) <[EMAIL PROTECTED]> Sent: Thursday, November 08, 2001 8:08 AM Subject: [Chevelle-List] Date: Thu, 8 Nov 2001 08:01:49 -0500 > > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > > > > Hi, > > I'm just starting on my '71 convertible and need some advice... I bought > the headers, mufflers, exhaust and intake (no carb yet). Would it be alright > to install the headers and exhaust stuff without installing the intake and > carb? The old single exhaust needs to be replaced now and it will be awhile > before I can buy the additional needed parts. I wasn't sure if I could > simply adjust the carb (2 barrel) to avoid leaning out the engine. The motor > is a 307 with 73K miles. I know the 307 isn't much for power, but at this > point I need to replace the exhaust. What say you? Thanks... > > James > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
