Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
3.70 and 3.73 are different. They are different pinion / ring gear combinations. A 10 tooth pinion with a 37 tooth ring gear (which Ford uses) gives you a 3.70 . An 11 tooth pinion with a 41 tooth ring gear will give you a 3.73. Close, but not quite the same. Bill Rob Means wrote: > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > hey guys, > I deal with this in my day 2 day grind, > 3.70:1 & 3.73:1 are the same ratio/gear set.............. > in order ta make them different the would have ta be such a "fine" > tooth count that they would have no strength at all -- same with their > trucks which were advertised as > front-4.09:1 & 4.11:1rear- purpose 4 this is so they could tell people that > the front axle would "pull" the rear axle 4 greater stability.........[boy > they could tell some stories] > Rob ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]