Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
I located a short style power steering pump from a 68 chevy 350 suburban. and I tried installing it on my 68 chevelle just to find out that it does not clear my steering box even if I adjust it as far as possible away from the steering box. I may be wrong but I think this will only fit a camaro or the donor vehicle. Does anyone know what other type of pump will fit with brackets. My current bracket has the two vertical bolts that bolt up to the driver side of the block on the driver side of the water pump while the other piece bolts to the motor mount. My question, If I find a power steering bracket with pump from a later model long style say Monte Carlo or what ever does anyone on this list know if it will bolt up and not have any alignment problems with the short style original pulley configuration ? On another note, I found a 67 chevy Impala 4-door with the 327/ 275 horse motor and it had camel hump heads, a/c, power steering "missing",ram horns and, air cleaner which looks like the base plate for a Holley carb since it has the two dimples in the front & back to clear the needle screws on top of the carb. Anyway is this also the base engine option for the 68 chevelle? I thought only camel humps came in performance option vehicles only? I didn't think they would carry the option of A/C. Paul Hernandez 68 chevelle Austin, Tx. ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
