Yes you can. When I bought my 67 Elky it had a later model cast iron intake and I replaced it with an Edelbrock - cannister fit fine in both instances. I have it plumbed into the air cleaner and use later model valve covers for oil filling.
Dale McIntosh TC Gold #92/ACES #1709 67SS/67 Elky > Subject: [Chevelle-List] 327 oil breather question > > > I have a small glitch I would like to try to work > around if possible- my 327 is from '67, and has an > oil breather that is mounted under the intake > manifold, over the cam. I don't have the original > intake, and am using one from a '68 327. I don't have > the heads on the motor yet, so I haven't been able to > check, but will the '68 intake fit properly over the > breather? I was told I could take the breather out if > I'm using valve covers with breathers, but I was > planning on using classic valve covers w/the > 'Chevrolet' logo on them. > > Can anyone tell me if they have had this issue or if > they know if the '68 intake will fit over the > breather? > > Thanks, > > Jim > '66 Malibu ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
