Or a speck of dirt; It doesn't take much! -----Original Message----- From: Zieg72 <[EMAIL PROTECTED]> Sent: Dec 31, 2003 3:11 PM To: The Chevelle Mailing List <[EMAIL PROTECTED]> Subject: Re: [Chevelle-list] teflon on tranny lines?
Perhaps a nick in the brass female end on the trans side??? ----- Original Message ----- From: "John Nasta" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" <[EMAIL PROTECTED]> Sent: Wednesday, December 31, 2003 5:11 PM Subject: RE: [Chevelle-list] teflon on tranny lines? > I would be surprised. The tranny lines are brand new. > > John Nasta > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Zieg72 > Sent: Wednesday, December 31, 2003 5:38 PM > To: The Chevelle Mailing List > Subject: Re: [Chevelle-list] teflon on tranny lines? > > I bet you have a slight crack in the flared end. Teflon wont help that. It > is just as easy to cut the end off and reflare it. I had a Chevy truck that > I had to do it on. My 2 cents. > Zieg > ----- Original Message ----- > From: "John Nasta" <[EMAIL PROTECTED]> > To: "Chevelle List" <[EMAIL PROTECTED]> > Sent: Wednesday, December 31, 2003 4:23 PM > Subject: [Chevelle-list] teflon on tranny lines? > > > > My TH350 is leaking a bit of fluid where the tranny cooling lines go into > > the trans. I tried tightening them but there is still a leak. Does anybody > > recommend Teflon tape or will it just melt? If not teflon, is there > anything > > else I can use to help seal that gap? > > > > Thanks, > > John Nasta > > > > > > > > > >