Yes, you should be able to get a rebuilt one in any local auto parts store.
John Nasta Old Car Network http://oldcarnetwork.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Cecil "Steve" Martin Sent: Tuesday, January 20, 2004 7:06 AM To: The Chevelle Mailing List Subject: RE: [Chevelle-list] 69 Wiper Motor Bob, It was Fry's auto parts in Beavercreek Ohio. But if he can order it, I would think many others could as well? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Bob Hiller -1 Sent: Tuesday, January 20, 2004 6:35 AM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] 69 Wiper Motor Cecil, what is the name of the local parts store that was able to order the rebuilt unit? Thanks, Bob Hiller ----- Original Message ----- From: "Cecil "Steve" Martin" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" <[EMAIL PROTECTED]> Sent: Monday, January 19, 2004 9:01 PM Subject: RE: [Chevelle-list] 69 Wiper Motor > > I am no expert here ...but aren't there two different options on motors > ..... those with "auto park" and those without? > > I went to a local parts store and they ordered a rebuilt one in. This one > was "auto park" and had the washer pump built in and it cost me something > like $46. > > Not sure of the quality yet. Haven't ran it yet. > > Steve > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of > [EMAIL PROTECTED] > Sent: Monday, January 19, 2004 2:11 PM > To: The Chevelle Mailing List > Subject: Re: [Chevelle-list] 69 Wiper Motor > > > In a message dated 1/19/2004 1:48:26 AM Eastern Standard Time, "Crazy Rusty" > <[EMAIL PROTECTED]> writes: > > >I am having a little trouble with my wipers on my 69 chevelle. The drivers > >side wiper doesn't seem to go down all the way when I turn the wipers off. > >It stops just above the windshield trim. I was thinking maybe it was the > >motor but then I started reading about wiper transmissions. > > > > > > > >Anyone had this experience? > > > > > >Thanks, > > > >JB > > > JB, > I had a similar problem with my 69 Elco. It could be the linkage or > "transmission" is getting sloppy. I seem to recall that I was able to pull > the arm and move it down a couple notches on the spline that the arm mounts > to, and that seemed to help. If your linkage is really bad, I think we have > a few used ones. > Sincerely, > Trevor Baker > Auto Obsession > 805-306-0795 > http://www.AutoObsession.com > > > > > >