|
Thanks
You
are 100% correct found it there yesterday after spending considerable time
trying to get it off the frame with a mirror and flash light. Also found the
build sheet with built vin number stuffed in the upper half of the back
seat. The really good news is they all matched the registration paper work so it
looks like I am set.
Gj
Depending on how far you
have the car apart, the VIN is stamped on the firewall under the blower motor.
You'll have to remove the heater box and fan and inner fender well. I found it
there on my 71 convertible and several other cars
also.
Gary
I have
another question related to the vin # if any one knows the answer. My vin
number is only partially there, that is the one on the front windshield. The
one on the driver door has been removed when they repaint. I have been told
that there is one locate on the frame some where. I was told it was in the
back end but I was unable to find anything there while I had all the
rear suspension out. The folks at the department of transport seem to
know where to look but are keeping that top secret. Does any one know were
that third location might be. Working to restoring a 71 Chevelle
convertible lots to do but pretty nearly ready for the first road test, but
know I will have to get the licensing issue worked out.
Garry
|
