----- Original Message -----
Sent: Tuesday, March 15, 2005 5:48
PM
Subject: Re: [Chevelle-list] Brakes - 65
Chevelle
Larry willimas wrote "It all worked before
I installed the booster"
did you add a new master cylinder ? If you
did make sure it's a disk./drum master.. you can also remove the
ristrictor in the disk master cyl. chamber. if it is in fact a drum/ drum
configured master cylinder..
Wayne
----- Original Message -----
Sent: Tuesday, March 15, 2005 7:23
PM
Subject: [Chevelle-list] Brakes - 65
Chevelle
Can't figure this out. Have disks on the
front (early camaro) and stock drums on the rear. Installed a new
8" brake booster and master cylinder, and a Tilton prop,
valve on the rear brakes. After bleeding the brakes I still can't
get sufficient pressure to the fronts even with the rears restricted 100%
(valve all the way in) to get acceptable front braking.
The front calipers are single piston. It
all worked before I installed the booster. It has good
vacuum.
Any suggestions? Copy Dave
Larry
Williams
