And if the fill plug hasn't been out in quite a while, it could be a real bear to remove.
Dale McIntosh -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Herb Lumpp Sent: Friday, May 27, 2005 4:38 AM To: The Chevelle Mailing List Subject: RE: [Chevelle-list] 4 Speed Fill Bolt/Plug Hi Tom, It sounds like you need to get a square socket (4 sided) vice a hexagon (more common 6 sided). Herb Lumpp http://users.adelphia.net/~hlump/index.htm -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Mark Schwartz Sent: Friday, May 27, 2005 1:35 AM To: Chevelle-list@chevelles.net Subject: RE: [Chevelle-list] 4 Speed Fill Bolt/Plug HI All, I have a muncie 4 speed in my 69 chevelle. I want to verify that the fluid level is at the proper height. I went tonight to take off the cover for the fill hole. I can't figure out if it's a press in plug or a bolt in. The cover looks similar to a nut but with a stem on it. Neither fits a bolt and with a vise grip using moderate pressure it didn't move. Can someone tell me how to get this bolt/plug off? thanks Thomas