Put the transmission end into a drill and spin it up. mike --- [EMAIL PROTECTED] wrote:
> Thank you, > > Yes I am going to check if the inner cable moves > when the transmission is moving and going to use a > drill to see if the speedo meter works. > > Kelly > > -----Original Message----- > From: Krister Meister <[EMAIL PROTECTED]> > To: The Chevelle Mailing List > <Chevelle-list@chevelles.net> > Cc: Chevelle-list@chevelles.net; > [EMAIL PROTECTED] > Sent: Mon, 6 Jun 2005 13:49:38 -0500 > Subject: Re: [Chevelle-list] Help: Trans/Speedo Help > Needed. > > > > > > > Easy way to check cable condition is with the old or > new cable hooked to > the trans, routed into the car correctly, unhooked > to the speedo (have it > hanging down so you can see or feel the end) - take > it for a slow ride > around the neighborhood and see if the inner cable > rotates > > Krister > > > > > > > [EMAIL PROTECTED] > > > > Sent by: > To: > Chevelle-list@chevelles.net > > [EMAIL PROTECTED] > cc: > > > evelles.net > Fax to: > > > > Subject: Re: > [Chevelle-list] Help: Trans/Speedo Help Needed. > > > > > > 06/06/2005 10:31 AM > > > > Please respond to The > > > > Chevelle Mailing List > > > > > > > > > > > > > > > > > I have a 64 El Camino with a Muncie 4 speed, M 21. > Just had it rebuilt > at Cottsman. Was recommended to me. After > getting the car back from > rebuilt transmission, my speedo does not work. > > I replaced the cable, and still nothing. I see the > old cable worked ok, > once I removed it. > > With my cable it is a screw on cap at both ends, so > not hard to replace. > Just can not figure why the speedo does not work > after having the > transmission rebuilt. yes it did work before the > transmission work. > Will be talking to them today. > > So I too need help with the Transmission and Speedo > cable too. > > Thank you All, > > Kelly > __________________________________ Discover Yahoo! Stay in touch with email, IM, photo sharing and more. Check it out! http://discover.yahoo.com/stayintouch.html