You can Bill with stuff from Lokar. If it's a manual trans, it's even easier - no auto trans hookup to worry about. Probably need a throttle cable bracket but they sell those as well. I used a 'universal' cable (you know, doesn't fit anything) and cut it to length along with one of their 'spoon' pedals and bolted it to the firewall when I was running the Accel/DFI.
Dale McIntosh -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Bradley Sent: Thursday, July 21, 2005 1:26 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] RE: 1969 accelerator cable install good luck John sorry i couldnt be of help, my 67 has a rod not a cable, but i'd love to change it over. Bill Bradley 67 Malibu Edmond Oklahoma http://www.cardomain.com/ride/1649723 ----- Original Message ----- From: "John Nasta" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" <Chevelle-list@chevelles.net> Sent: Thursday, July 21, 2005 10:34 AM Subject: RE: [Chevelle-list] RE: 1969 accelerator cable install > Well, I'm about to go and try to install my new accelerator cable. > Hopefully > I have the right one and the way to attach it to the pedal arm will reveal > itself. > > John Nasta > > > > >