Re: [Chevelle-list] Front end rebuild

[Mike Holleman]

Chassis bolts are grade 8 or better. The ones that attach the control arms if original have a small shoulder and use a lock nut. The originals are better than most replacement bolts you will find and if they do not show wear reuse them. Mike ----- Original Message ----- From: [EMAIL PROTECTED] To: The Chevelle Mailing List Sent: Monday, December 05, 2005 11:05 AM Subject: Re: [Chevelle-list] Front end rebuild John,   The bolts should be fine as long as they have not been yielded but, why re-use such a inexpensive and critical part? I would think a grade 5 would be all you would need; you can look at the markings on the head to identify what you have/what was used originally. IE, if you have 3 lines pointed toward the center, you have a grade 5 bolt. If confused, find a fastener store nearby[ Revcar, Fastenal,etc] and let the counter guys help you. Don't forget to lubricate your new bolts; threads and all surfaces, like washers, that will see friction.   Good luck,   Rich -----Original Message----- From: Chevelle List <[EMAIL PROTECTED]> Sent: Dec 4, 2005 3:17 PM To: The Chevelle Mailing List Subject: [Chevelle-list] Front end rebuild Hi Everyone.. I am rebuilding my frontend over the winter here in Alberta...Canada...I have all new pieces, in fact the only things that I will be re-using are the upper and lower control arms.I was wondering about the original bolts..Do you think that I should re-use them or go and get new??I was thinking they may loose their strength over time..I don't know..If I do get new are they regular Grade 8 bolts or is there better ones to use??? Thanx John No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.12/192 - Release Date: 12/5/2005