Thanks... -----Original Message----- From: D.R. Jones [mailto:[EMAIL PROTECTED] Sent: Sunday, December 18, 2005 12:59 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Rear Upper Control Arm Bushings
In Burleson just south of Fort Worth. D.R. Jones Dan Mascheck wrote: > Where are you in Texas? Curious? > > Dan Mascheck > > -----Original Message----- > From: D.R. Jones [mailto:[EMAIL PROTECTED] > Sent: Thursday, December 15, 2005 4:29 PM > To: The Chevelle Mailing List > Subject: Re: [Chevelle-list] Rear Upper Control Arm Bushings > > By the way where are you located? If close to Texas we can pull it in > the shop and do them. > > D.R. Jones > > Brad Waller wrote: > > >>Well, after almost 40 years mine are shot. Any of you ever done this job >>yourself? I had my front end aligned, and the guy at the shop recommended >>that I replace them. He said it would be an easy job, except for the >>bushings on the differential housing. He said that these are press-fit > > and > >>would be tough. >> >>Any thoughts or advice? >> >>Brad Waller ([EMAIL PROTECTED]) >> >>'66 Corvette | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFG R1 >>'67 Chevelle | ex-SS396 | 355/700R4 | F-Body Brakes | 275/40/17 Kumho MX >> >> >> >> >> > > > > > > >