Thanks to all that answered my first post. I have another question though for everyone on the list. Did anyone have to install the diode in the line going to terminal #4 off of the external voltage regulator when they put an MSD6AL box on their car if they were still using an external regulator?
John L. ACES #5597 70 LS5 TRIBUTE http://chevellfan.com/index89.html http://www.larueclassics.com/gallery/gallery%20pages/lodanier-chv70.html -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Malibu65 Sent: Tuesday, February 14, 2006 12:36 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] MSD 6AL Installation with Pertonix module. [EMAIL PROTECTED] wrote: >I will be installing an MSD6AL ignition box when I change out my heads. >I have a Pertonix ignition module in my stock distributer and the >diagram in the MSD box shows a diagram for the installation of the box >with Pertonix. My problem is this, the diagram shows to hook the >switched line from the ignition switch to the red line off of the >Pertonix module and to another line from the MSD box, I don't have the >diagram in front of me so I don't remember the color of the wire off of >the MSD box but I have two wires coming through the fire wall now >hooked to the positive side of the coil along with the red line from >the Pertonix module. My question is this, do I hook both of these wires >to the red line off of the Pertonix module and the line to the MSD box? >Sorry for the long winded post and thanks in advance for any help. > >John L. > > Hi John, The number of wires to hook together is four. 1) The ignition switch 2) Pertronics module 3) MSD6AL power 4) The wire to the starter solenoid Hope this helps. Chuck K 65 Malibu 327 - 4 speed
