Does anyone on the list besides me have a chambered exhaust system on their chevelle. I love mine cause it sounds soooo good and is street legal. gm66
--- Ron Zeppin <[EMAIL PROTECTED]> wrote: From: Ron Zeppin <[EMAIL PROTECTED]> Date: Mon, 27 Feb 2006 10:29:17 -0700 To: The Chevelle Mailing List <Chevelle-list@chevelles.net> Subject: Re: [Chevelle-list] Exhausts I have 3" going back to a pair of series 40 Flowmasters then 2.5" all the way out the back. I haven't taken it down the strip yet, but I've got a moderately healthy 400 small block in my '68 and would imagine I could drop a pretty healthy big block in it with the same exaust with no worries. Ron [EMAIL PROTECTED] wrote: >Jimmy, > You could use either 2.5 or 3". As far as performance both will >get the job done for your combo. I went 11's with cheap 2.5" >mufflers. So the true decisions are based on $$$ available. I would >tend to lean toward 3" and try to get it in stainless. Mandrel bent >pipes are a must. Many kits are available that fit right in the >factory locations. My Borla setup has 2.75" tailpipes and utilize the >factory mounting points. I like Flowmaster but have heard very good >things about Pypes. > >$.02 >Walt >http://www.personal.kent.edu/~wbainey/CHEVELLE.htm >http://www.personal.kent.edu/~wbainey/BORLA.htm > >----- Original Message ----- >From: "Jimmy C." <[EMAIL PROTECTED]> >Date: Monday, February 27, 2006 11:27 am >Subject: [Chevelle-list] Exhausts > > > >>I'm in the market for an exhaust system,I Have a mostly stock >>454ci .60 over, mild cam with a street avenger 770 , stock open >>chamber oval heads ,super comp headers and would like to know if I >>should go with a 2.5"inch or 3" inch pipe. The anyone has had any >>experiance with Pypes 3"inch crossover system with cut outs. looks >>like a nice system, but more expensive than Flowmasters. Jimmy C. >> >> > > > > _____________________________________________________________ Netscape. just the net you need
