BTW,
Corroless is not an Eastwood product. They may have sold it for a while, but
that doesn't make it theirs. -----Original
Message----- POR 15 does not need a top coat can not be
sprayed. Use foam brushes and throw away. I have used both and the Eastwood
products need more prep to look good if you won't see the end result but want
protection go with POR 15. On 3/14/06, John Nasta
<[EMAIL PROTECTED]> wrote: Thanks
Eddie. I was looking at the Devilbiss (sp?) spray guns because they say that
you can spray upside down with their gravity feed guns as long as you use the
cup liner. I would imagine that being able to spray upside down is important
when doing an undercarriage. Is there a reason that most people seem to use
gravity feed rather than suction feed? Do you get a more uniform flow of paint
or is it a price issue? I also
read that you get what you pay for with these guns, and if you want to do good
quality exterior paint work, don't buy any gun under $200, but if you are just
doing undercarriage and/or industrial surfaces, guns around $100 are fine. -----Original
Message----- Yes, eastwood
has what you need. Im doing the frame and the underside now. They have spray
cans in everthing. But I prefer the sraygun. Goodluck Eddie Bumgarner 66ss
conv. I am going to be pulling the fuel tank out of the '70 this
weekend, and as
|
- Re: [Chevelle-list] painting undercarriage Karl Groves
- Re: [Chevelle-list] painting undercarriage Larry Shouse
- Re: [Chevelle-list] painting undercarriage Herb Lumpp
- Re: [Chevelle-list] painting undercarriage Jim H. Thompson
- Re: [Chevelle-list] painting undercarriage John Nasta
- Re: [Chevelle-list] painting undercarriage Trooper
- Re: [Chevelle-list] painting undercarriage John Nasta
- Re: [Chevelle-list] painting undercarriage John Nasta
- Re: [Chevelle-list] painting undercarriage Danny Wilsher
- Re: [Chevelle-list] painting undercarriage Jim H. Thompson