For me, it's www.metalsupermarket.com.
Tom
Brian Knight wrote:
Jimmy, in KY, the metal supermarket is a division of Alro metals. They
are at www.alro.com.
Brian
From: "Jimmy C." <[EMAIL PROTECTED]>
Reply-To: The Chevelle Mailing List <Chevelle-list@chevelles.net>
To: "The Chevelle Mailing List" <Chevelle-list@chevelles.net>
Subject: Re: [Chevelle-list] sheet metal
Date: Tue, 21 Mar 2006 07:18:55 -0500
Tom is ther a website for the metals supermarket. thanks Jimmy C.
----- Original Message ----- From: "Tom Tomlinson" <[EMAIL PROTECTED]>
To: "The Chevelle Mailing List" <Chevelle-list@chevelles.net>
Sent: Sunday, March 19, 2006 10:09 AM
Subject: Re: [Chevelle-list] sheet metal
Yes, I'm using it to make my own panels. Metals Supermarket just
sells metal; not patch panels.
When I was getting started (learning to weld, patch etc), I went to
our local Metals Supermarket and said I needed some metal for some
body work. The owner said that most body shops use 18-20 gauge. I
could either get a sheet of "regular" cold rolled steel, or an alloy
that was specifically used for auto body work that was better for
forming and holding its shape. It was more expensive, but I can't
remember what I paid for it (I'm still working from the original
sheet). I think it may have had some Aluminum in it. Next time I go,
I'll ask what the metal was called.
And a correction to my original post. The metal I'm using is 19
gauge. I'm using .023 welding wire (MIG). I have also used patch
panels from Year One, but there were a few other spots that needed
some relatively easy repair where no patch panels exist. I may also
use the sheet metal for smoothing the firewall, and fabricating a
new tunnel for the Tremec 5 speed. This is for my '66 Elky.
Tom Tomlinson
John Nasta wrote:
Are you fabricating your own panels from this special alloy? If
they are
talking about pre-stamped panels then I can just about guarantee
you that
it's the same "special alloy" that everyone else sells.
John Nasta
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Tom Tomlinson
Sent: Saturday, March 18, 2006 7:35 PM
To: Chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] sheet metal
When I went to Metals Supermarket to get sheet metal for my 66 Elky,
they told me most body sheet metal is 18 gauge. They also had a
special
alloy (I can't remember the name of it) that is easier to form and
holds
its shape better. That's what I'm using on mine. I haven't checked the
gauge precisely, but it seems correct.
Tom Tomlinson
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's
FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/