Thanks Larry, my late model small block has valve cover bolts in the
center rather than the edge. Summit shows them for center bolt valve
covers but it would not look nearly as clean as yours.
Thanks,
Dennis McGillis
'65 Malibu SS-350
----- Original Message -----
Sent: Thursday, May 25, 2006 9:35
AM
Subject: Re: [Chevelle-list] Spark plug
wires
Dennis,
If you do a search with just RNM- in the search
box, you will see them all. They come in polished, red or blue for all kinds
of applications.
To install, you just back out two of your valve
cover bolts, match up the holes and put the bolts back in.
It costs around $40.
Larry Shouse
----- Original Message -----
Sent: Thursday, May 25, 2006 11:41
AM
Subject: Re: [Chevelle-list] Spark plug
wires
Hi Larry,
Your big block does look great. Please tell me
about your plug wire guides. Do you know if there is something similar
for late model small blocks? Do they screw onto the side of the
head?
Thanks,
Dennis McGillis
'65 Malibu SS-350
----- Original Message -----
Sent: Thursday, May 25, 2006 6:27
AM
Subject: Re: [Chevelle-list] Spark
plug wires
Jim,
Thanks for the kudos. The air cleaner is a
combination of a drop down base, a 14x2.5 inch K&N Filtercharger, and
the top is a K&N X-stream filter top that is supposed to add 500+ cfm
of airflow. I had to go with this combination to overcome my clearance
issue in my 66 brought on by the use of the Edelbrock Performer RPM Airgap
intake.
Larry Shouse
----- Original Message -----
Sent: Thursday, May 25, 2006 9:19
AM
Subject: Re: [Chevelle-list] Spark
plug wires
Larry, That is beautiful. I will use
it as a guide for mine. Interesting air cleaner.
What is it??
Jim S.
----- Original Message -----
Sent: Thursday, May 25, 2006 9:03
AM
Subject: Re: [Chevelle-list]
Spark plug wires
Ditto. I also bought the MSD p/n 35379
for the big blocks which are 8.5mm spiral wound 50 ohm wires with the
bendable ends. They are red with gray boots.
As a sidenote about MSD as a company,
when I assembled my engine, I took it in to have it dyno'ed. In the
process, I lost my coil wire. Not being able to find a suitable
replacement at Summit, I called MSD. They sent one out at no charge.
Way to go MSD!
Here's a picture of my engine with the
wires.
Larry Shouse
----- Original Message -----
Sent: Thursday, May 25, 2006
12:57 AM
Subject: Re: [Chevelle-list]
Spark plug wires
I found that MSD Multi-angle ends
worked best with my BB and Hooker headers. They can each be
bent to fit their particular location.
Devin
----- Original Message -----
Sent: Wednesday, May 24, 2006
8:33 PM
Subject: [Chevelle-list]
Spark plug wires
I've been meaning to ask for a recomendation on wires as
well. I have a 69 396SS with Hooker Comp headers and I'm needing
to replace the plug wires. Any brands to avoid? 45 degree
boots? 135 degree boots?
-----Original
Message----- From: [EMAIL PROTECTED]
Sent: May 23, 2006 9:05 PM To: Chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] (no subject)
I bought some of
the Taylor 8MM spiral wound wires. Just plain black, with the 45
degree boots. You can get them straight, or 90 degree also. They
appear stock, only giveaway is some white writing on them.
|