Re: [Chevelle-list] ZBar Assembly

[Jim Buckingham]

Thanks  that is what mine shows, a seal on that side only with the washer.   Jim From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dale Sent: Friday, September 22, 2006 12:14 PM To: [EMAIL PROTECTED]; 'The Chevelle Mailing List' Subject: Re: [Chevelle-list] ZBar Assembly I have a 66, 67, and 69 AIM.  The 66 and 67 shows the seal the outer item on bar, last piece before frame bracket; the 69 shows a washer between the seal and frame bracket. Later years ‘probably’ used the extra metal washer to protect the seal.  Can send a picture offline if you like.   Dale McIntosh 1967 Chevelle Reference CD ACES #1709/TC GOLD #92   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Buckingham Sent: Friday, September 22, 2006 5:57 AM To: 'The Chevelle Mailing List' Subject: [Chevelle-list] ZBar Assembly   I am putting the ZBar in and wonder where the felt like washers go???  None of the drawings I have show anything like that.   I know the two seals and spring clip go to hold the frame side pivot ball in.  From there is jsut a guess.   Thanks,   Jim   72 Chevelle Small Block