Thanks
Again!
-----Original Message-----I have that valve on m my 72 as a replacement for the stock valve. It will mount in the original location & use stock lines - at least on 72. BTW - Stock location is on inside of frame rail directly beneath th emaster cylinder.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Rick Schaefer
Sent: Sunday, November 05, 2006 8:29 PM
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] Proportioning Valve Help
On 11/5/06, Larry Shouse <[EMAIL PROTECTED]> wrote:Thanks. I'll be looking forward to seeing the tonight after I get back from the coast...Larry Shouse-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED]
Sent: Sunday, November 05, 2006 1:18 PM
To: chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] Proportioning Valve HelpLarry,Ill snap some pictures today for yah. Mines right underneath the master cylinder, held up by the lines. However I hear this is bad, because of the p-valve jumping around, over time the lines will crack. There is a L bracket that mounts right there, that you can actually bolt the p-valve to also. Or you could always mount it low on the frame, which is what they did stock. Once my camera batteries charge up I will send you some pictures!
--
Rick Schaefer
72 TPI El Camino