Karl- From the 2006 rulebok: Lines: All non-oem fuel lines(including gauge and or data recorder lines) must be metallic, steel braided, or NHRA accepted woven or woven push-lock. A maximum of 12 inches total (front to rear) of non-metallic or non steel braided is permitted for connection purposes only.
>From personal experience, I redid my entire fuel system (tank to carb) in 1/2" aluminum and have no problems at tech inspection. My concerns were to mount it every foot or so to reduce vibration, which can lead to cracks. Devin ----- Original Message ----- From: "Karl Groves" <[EMAIL PROTECTED]> To: "'The Chevelle Mailing List'" <chevelle-list@chevelles.net> Sent: Saturday, November 18, 2006 6:19 AM Subject: [Chevelle-list] NHRA Rules - Fuel Line > > It has been a loooong time since I read the NHRA rules. From what I > remember, the rules say no more than 12-inches of rubber fuel line. > What do the rules say about Aluminum line? > > The reason I ask is because I can't seem to find 1/2 fuel line anywhere. The > only 1/2 line I can find is Aluminum. > > Any & all comments are welcome, because I'm drawing a blank here. > > Karl Groves > Master Certified CIW > http://www.karlcore.com > > Will Work For Parts: > http://chevelle.karlcore.com/detail.php?id=3 > > >