Just a point of clarification. When I said "just a hose" I didn't mean
garden hose. I just meant that you don't have to worry about special
bends in the metal, because you re-use the metal parts of the old
return hose assembly, and just clamp the new hose on.
Quoting "Jim H. Thompson" <[EMAIL PROTECTED]>:
http://www.gates.com/part_locator/index.cfm?location_id=3002
Check this site out for part numbers. Power steering hose is made not to
degrade from chemical exposure.
The return hose is just a piece of hose. You can get the pressure hose
from any local parts store but it will not be bent the same way as OEM
and you will have to modify the end that connects to the steering box,
unless it is going to be a show car, in which case I think the people
here could point you to a match for OEM.
