Almost forgot, I used original flat hood nozzles, but it seems that somewhere along the line I heard that cowl hood uses different nozzles. Don't know if this is fact or not.
On 10/27/07, Rick Schaefer <[EMAIL PROTECTED]> wrote: > > Any answer yet? I spent some time this AM looking thru the 72 > Assembly manual & the 72 Fisher Body Manual & couldn't find anything > definite. The assembly manual page (1A2D) is reproduced very poorly & I > can't tell exactly how they are mounting the nozzles. > > I did go look at my cowl hood and can tell you where I mounted them > several years ago. I don't remember what rational or info I used, but this > what I did. > > Passenger side, there is a "bubble" in the cowl screen that seemed to > be the location. The nozzle is mounted about 3 inches inboard of the rise > for the hood bubble. And stix out thru the screen bubble. > Driver side - Mounted just barely outboard of the beginning of the rise > for the hood bubble. > > FYI - If you use the cowl screen, be very careful about which screws you > use to mount it. I bought a repro screen & screws. The screws were a > hair too long. After I mounted the screen I had 5 or 6 little dimples > sticking up at the back of the "good" side of the hood. Paintless dent > repair got them out, but it was aggravating. > > Going back to the nnozzles, I don't remember if I used predrilled holes or > not. Hope this helps. > > > On 10/26/07, Jim Balitz <[EMAIL PROTECTED]> wrote: > > > > I swapped out my my '72 Chevelle standard hood for a non-functional cowl > > hood. The cowl hood does not have wiper nozzles mounted. I need to know > > which sets of holes, on either side of the cowl,the nozzles get mounted in? > > > > If anyone has a picture or sketch of a '70-72 cowl hood with the nozzles > > showing, I would really appreciate it. Thanks. > > > > 72Chevy > > > > > > > > -- > Rick Schaefer > 72 TPI El Camino > > -- Rick Schaefer 72 TPI El Camino
