BillL
I'm working on a '67 SS. Initial alignment angles were -1/4 degree
camber and -3 degrees caster on both sides. There were no shims in
the front arm bolt and about 1/4"~5/16" shim stack on the rear
bolt. All of the control arm bushings are worn out and will be
replaced, along with the ball joints. I'd like to get some positive
caster in the car, and I was wondering if the offset shafts will give
you caster gain as well as fixing camber? I'm OK with 0~1/4 degree
camber, but more caster will help stabilize the steering. TIA,