Thank's to all who gave their time!
I have the motor in...and will connect everything tomorrow...hopefully NOT burn
the Chevelle down...LOL!
You got to love them Chevelle's...
There's a local show tomorrow...where there's a Chevelle with a SIX figure
value...Lisa's already got my drool towel ready!
Thanks' again!
"Doc" Lawson
--- Begin Message ---
Today's Topics:
1. Re: 1972 Chevelle Wiper Motor... (Rick Schaefer)
2. Re: 1972 Chevelle Wiper Motor... (Charles Speake)
3. Re: Clay bars (Daniel Mascheck)
4. Re: Clay bars (richard sierra)
--- Begin Message ---
Yes, the bushing is available in the HELP section at most parts stores.
On Thu, Oct 9, 2008 at 11:57 AM, Ed Riggins <[EMAIL PROTECTED]> wrote:
> Don't they have an isolation bushing on each fastener? Ed
>
>
> ------------------------------
> *From: *<[EMAIL PROTECTED]>
> *Reply-To: *The Chevelle Mailing List <chevelle-list@chevelles.net>
> *Date: *Wed, 08 Oct 2008 03:43:01 +0000
> *To: *<chevelle-list@chevelles.net>
> *Subject: *[Chevelle-list] 1972 Chevelle Wiper Motor...
>
> For the life of Brian! (I dont know a Brian...but it means that I'm
> FRUSTRATED!)
>
> Those fortunate to have a Wiper Motor on your A-Body...PLEASE go out, look
> at it and tell me if there are more than ONE rubber isolation/mounting
> bushing.
>
> I took my motor off over 20 years ago...was confident that I had replaced
> the fasteners to the firewall...that said...I just bought a new motor...and
> have spent OVER a hour trying to figure out what size/length the fasteners
> are to mount it to the firewall!
>
> HELP...HELP...HELP...
>
> I can see how to orient the motor...and even found the harness/washer
> supply lines right where I left them....I just dont seem to have the correct
> fastner/washer...to mount it up!
>
> Thank's In Advance!
>
> "Doc" Lawson
> Team Chevelle # 145
> ' 72 Chevelle SS
> "Cheaptrick"
>
>
--
Rick Schaefer
72 TPI El Camino
--- End Message ---
--- Begin Message ---
I bought a replacement set for my 70 Chevelle from either Year One, C.A.R.S.
Inc, or OPG I can't remember which. It comes with the isolation mounting
bushings and the screws. Three each.
Ridiculously priced though, or at least I thought so, but if you want the
correct original style there are not a lot of options. Maybe a parts yard
that you could go and pull them off of one of the parts cars.
Chuck Speake
1970 Chevelle Malibu
Glen Ellyn, IL.
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rick Schaefer
Sent: Thursday, October 09, 2008 2:34 PM
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] 1972 Chevelle Wiper Motor...
Yes, the bushing is available in the HELP section at most parts stores.
On Thu, Oct 9, 2008 at 11:57 AM, Ed Riggins <[EMAIL PROTECTED]> wrote:
Don't they have an isolation bushing on each fastener? Ed
_____
From: <[EMAIL PROTECTED]>
Reply-To: The Chevelle Mailing List <chevelle-list@chevelles.net>
Date: Wed, 08 Oct 2008 03:43:01 +0000
To: <chevelle-list@chevelles.net>
Subject: [Chevelle-list] 1972 Chevelle Wiper Motor...
For the life of Brian! (I dont know a Brian...but it means that I'm
FRUSTRATED!)
Those fortunate to have a Wiper Motor on your A-Body...PLEASE go out, look
at it and tell me if there are more than ONE rubber isolation/mounting
bushing.
I took my motor off over 20 years ago...was confident that I had replaced
the fasteners to the firewall...that said...I just bought a new motor...and
have spent OVER a hour trying to figure out what size/length the fasteners
are to mount it to the firewall!
HELP...HELP...HELP...
I can see how to orient the motor...and even found the harness/washer supply
lines right where I left them....I just dont seem to have the correct
fastner/washer...to mount it up!
Thank's In Advance!
"Doc" Lawson
Team Chevelle # 145
' 72 Chevelle SS
"Cheaptrick"
--
Rick Schaefer
72 TPI El Camino
--- End Message ---
--- Begin Message ---
I may try it, but it sounds like plenty of work! Any secrets to using one?
-----Original Message-----
From: Doug [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 08, 2008 1:46 PM
To: 'The Chevelle Mailing List'
Subject: Re: [Chevelle-list] Clay bars
I have used it took a lot of road film off. Then used cleaner/wax the best
my car has looked, have a hard time putting car cover on it!!!!!
Doug
66 Chevelle
-----Original Message-----
From: Dale [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 07, 2008 7:12 PM
To: 'The Chevelle Mailing List'
Subject: [Chevelle-list] Clay bars
I've used one and while it does take time, it works removing road film.
FWIW, you might use a valid subject on the Subject line. Many people don't
read the digest. :*)
Dale McIntosh
ChevelleCD.com
ChevelleStuff.com
>
> Have any of you tried using one of the clay bars??? Looks like plenty of
> work and does it help remove sap and old crud??
>
--- End Message ---
--- Begin Message ---
I haven't used it on my chevelle but I did use it on my '86 Corvette prior to
me selling it - My vette was a deep wine color and the clay bar brought out the
richness of the paint - Secret only do a small area at a time back and forth,
not in a circular motion; keep the surface of the car wet and constantly fold
the bar into itself similar to using bread dough - Most important - if you
accidently drop it on the ground DO NOT REUSE IT!!!! You'll end up damaging
your paint - Also once you use it on your wheels DO NOT REUSE IT ON THE BODY OF
THE CAR!!! The clar bar will pick up any brake dust!!!!
Rich
'70 SS Chevelle coupe
'01 Corvette convertible
> From: [EMAIL PROTECTED]> To: chevelle-list@chevelles.net> Date: Thu, 9 Oct
> 2008 19:14:40 -0500> Subject: Re: [Chevelle-list] Clay bars> > I may try it,
> but it sounds like plenty of work! Any secrets to using one?> >
> -----Original Message-----> From: Doug [mailto:[EMAIL PROTECTED] > Sent:
> Wednesday, October 08, 2008 1:46 PM> To: 'The Chevelle Mailing List'>
> Subject: Re: [Chevelle-list] Clay bars> > I have used it took a lot of road
> film off. Then used cleaner/wax the best> my car has looked, have a hard
> time putting car cover on it!!!!!> > Doug> 66 Chevelle> > -----Original
> Message-----> From: Dale [mailto:[EMAIL PROTECTED] > Sent: Tuesday, October
> 07, 2008 7:12 PM> To: 'The Chevelle Mailing List'> Subject: [Chevelle-list]
> Clay bars> > I've used one and while it does take time, it works removing
> road film.> FWIW, you might use a valid subject on the Subject line. Many
> people don't> read the digest. :*)> > Dale McIntosh > ChevelleCD.com >
> ChevelleStuff.com > > > > > Have any of you tried using one of the clay
> bars??? Looks like plenty of> > work and does it help remove sap and old
> crud??> > > > > > > > > > > > >
_________________________________________________________________
Want to do more with Windows Live? Learn “10 hidden secrets” from Jamie.
http://windowslive.com/connect/post/jamiethomson.spaces.live.com-Blog-cns!550F681DAD532637!5295.entry?ocid=TXT_TAGLM_WL_domore_092008
--- End Message ---
_______________________________________________
Chevelle-list mailing list
Chevelle-list@chevelles.net
http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net
--- End Message ---
