Makes Sense!!! Will work!!
----- Original Message -----
From: <bad66chevelle...@aol.com>
To: <chevelle-list@chevelles.net>
Sent: Sunday, December 14, 2008 7:02 PM
Subject: Re: [Chevelle-list] window cranks
Another method I've heard of is to get a shop rag, and slide it under
the handle...the clip will eventually grab the rag and pop off. Never
tried it, but good luck.
-----Original Message-----
From: Rich Pruett <busted_knuck...@comcast.net>
To: The Chevelle Mailing List <chevelle-list@chevelles.net>
Sent: Sun, 14 Dec 2008 8:53 am
Subject: Re: [Chevelle-list] window cranks
Funny.....I was thinking it and you wrote it!
I cooked a squirrel in my animal loving wife's crock pot once; boy was
she PO'ed.
--
Just think, if it weren't for marriage, men would go through life
thinking they had no faults at all.
You can only be young once. But you can always be immature.
--- Dave Barry
-------------- Original message --------------
From: "Johann Grobler" <johann.grob...@absamail.co.za>

The other alternative after your wife has killed you! is to use a
bicycle spoke and bend the tip like a chrocet needle, add a handle. It
works better and lasts longer! And you have a happy wife!
----- Original Message -----
From: rml...@comcast.net
To: BOBBY
Sent: Sunday, December 14, 2008 3:15 PM
Subject: [Chevelle-list] window cranks
O k who knows the best method for removing the rear window crank
handle. I cant seem to get a screwdriver behind it to pop the spring
clip out. Iam trying to remove the rear interior p
anels to replace the
sail panels and the rear deck panel. Thank you. Bob.
