Does anyone have the dimensions for the 1964-1967 brackets? I'd like to measure to see if they might work before spending money on them. Otherwise I may just have to make my own...
On Mon, 2010-01-25 at 15:36 -0500, derick7...@aol.com wrote: > I am also looking for Radiator support Core brackets for my 70 but > nobody seems to be reproducing them yet. > > Dave > > In a message dated 1/25/2010 12:31:40 P.M. Pacific Standard Time, > chevy...@hughes.net writes: > > It's a very common item that needs replaced. I'm sure > Groundup, NPD, Year One, OPG. One of them would have it. Just > need to check around. Go for the cheapest, they are all the > same. > > Trooper > > ----- Original Message ----- > From: Don Hoeschen > To: The Chevelle Mailing List > Sent: Monday, January 25, 2010 1:53 PM > Subject: Re: [Chevelle-list] Radiator Support Bracket > > > That's the one! > I didn't check '69. Do you know off hand if anyone > has them? > > On Mon, 2010-01-25 at 13:26 -0600, Trooper wrote: > > > > > Are you talking about the bracket that is welded to > > the front radiator support and bolts to the frame? > > The pass side that always gets ate up by battery > > acid. If so, it would be the same as for 69. > > > > Trooper > > > > ----- Original Message ----- > > From: Don Hoeschen > > To: The Chevelle List > > Sent: Monday, January 25, 2010 12:38 PM > > Subject: [Chevelle-list] Radiator Support > > Bracket > > > > > > I need a new passenger side bracket for my > > radiator support but can't find one for a > > 1968 anywhere. I didn't see anything on the > > Year-One or Goodmark website but NPD sells a > > pair that fits 1964-1967 models. I could > > "make" them work if I had too but would > > rather buy the right part. Has anyone had > > any luck finding these?