Inner tie rod zerk fittings should be facing the center of the car (towards engine) so they can be accessed with a grease gun. Outer tie rod zerk fittings are installed opposite the ball stud. The correct part number for the inner tie rod is Moog ES681N and ES333R for the outer. They are interchangeable side to side. Tom Rightler MCC Newsletter Editor http://www.mdchevelleclub.com -----Original Message----- From: chevelle-list-boun...@chevelles.net [mailto:chevelle-list-boun...@chevelles.net] On Behalf Of Larry Williams Sent: Saturday, April 02, 2011 6:56 PM To: chevelle-list@chevelles.net Subject: [Chevelle-list] 65 Chevelle Steering
For you guys that have 65s. Where is your zerk fitting located on the inboard tire rod ends. I had new tie rod ends installed and the inboard zerks are pointing toward the pan. I bought some other tie rod ends for the inboard spot and zerks are located on the back facing to the rear. Will this work? Larry Everyday Is A Saturday ----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1209 / Virus Database: 1500/3547 - Release Date: 04/02/11