"Channel spacing is irrelevent." If the mic is causing the TX to deviate outside the expected receiver band then it's not irrelevant and will be squelched. It's basic receiver limitations, DSP or no DSP.
Tony ________________________________ From: [email protected] <[email protected]> on behalf of Nigel A. Gunn G8IFF/W8IFF <[email protected]> Sent: Sunday, January 5, 2020 1:44:35 PM To: Discussion of CHIRP <[email protected]>; Jonas Haiduk <[email protected]> Subject: Re: [chirp_users] Programming Troubles Channel spacing is irrelevent. He cant hear you because you have CTCSS encode on and he DOES NOT have CTCSS decode on. You both need either encode AND decode ON or both OFF. On 05 January 2020 at 11:52 Jonas Haiduk <[email protected]> wrote: My friend gave me a spreadsheet of frequencies programmed into his radio, which included the following [cid:375c6d51-b334-42c5-b8ed-101eba3ef251] [cid:a9a868ba-c931-4be8-b64c-55106e542ddd] I can hear him through my radio, but I cannot send to him so that he can hear me. Attached is a screenshot of what I attempted in CHIRP. I have a feeling the problem I am experiencing is due to the Channel Spacing column from his spreadsheet, which I'm not sure how to deal with in CHIRP I have a BAOFENG A-58 and am using CHIRP for Mac. Thanks in advance for any help! Jonas _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at [email protected] To unsubscribe, send an email to [email protected] Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www http://www.ngunn.net
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
