Thanks Jim, I will try that.
Don
Sent: Tuesday, April 28, 2020 at 7:16 PM
From: "Jim Unroe" <[email protected]>
To: "Discussion of CHIRP" <[email protected]>
Subject: Re: [chirp_users] Import/Export and CROSS
From: "Jim Unroe" <[email protected]>
To: "Discussion of CHIRP" <[email protected]>
Subject: Re: [chirp_users] Import/Export and CROSS
On Tue, Apr 28, 2020 at 9:22 PM Don Goodrich <[email protected]> wrote:
>
> Thanks Jim
>
> My issue with this approach is that I support a large group of HAM radio operators that want to keep the "image" in sync with all of their radio's which cover multple, versions, models, and makes of radios (over 200 HAMs) where the CSV file is the common denominator for all of them. Unfortunately, an image file is unique for each radio.
>
> The only work around I have then is to import the CSV and manually repair the entry for every radio programmed.... what would normally take less than 60 seconds per radio to several minutes.
>
> Don
Don,
Then do like I do. My UV-5R image is my master image. I have several
different brands and models of radios here. Whenever I program a radio
I just "import" the UV-5R's *.img file into the tab that I am
programming. It works exactly the same as importing a CSV file (you
just choose *.img instead of *.csv) except, it handles more settings
(such as split DCS codes, Cross Mode settings and "Other" settings
like BCL).
Jim KC9HI
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Don Goodrich at [email protected]
To unsubscribe, send an email to [email protected]
>
> Thanks Jim
>
> My issue with this approach is that I support a large group of HAM radio operators that want to keep the "image" in sync with all of their radio's which cover multple, versions, models, and makes of radios (over 200 HAMs) where the CSV file is the common denominator for all of them. Unfortunately, an image file is unique for each radio.
>
> The only work around I have then is to import the CSV and manually repair the entry for every radio programmed.... what would normally take less than 60 seconds per radio to several minutes.
>
> Don
Don,
Then do like I do. My UV-5R image is my master image. I have several
different brands and models of radios here. Whenever I program a radio
I just "import" the UV-5R's *.img file into the tab that I am
programming. It works exactly the same as importing a CSV file (you
just choose *.img instead of *.csv) except, it handles more settings
(such as split DCS codes, Cross Mode settings and "Other" settings
like BCL).
Jim KC9HI
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Don Goodrich at [email protected]
To unsubscribe, send an email to [email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
