Hi Glen, On Tue, Jul 14, 2020 at 2:24 AM Glenn K0LNY <[email protected]> wrote: > > Hi All, > Hoping someone here will be able to help. > Ubuntu 16.43, and I'm trying to import a CSV file that I have used on my > Baofengs, onto a new radio. > It is a Wouxun KG UV 7D. > I selected the 6D in the radio list in the Chirp radio selection, since when > looking for the manual at the Wouxun site, I contacted them looking for the > manual and they suggested I use the 6D manual, because the only difference is > the power.
The manual (or how the radio operates) may be the same, but that doesn't mean internally the radios are the same. > So the 6D selection should work in Chirp, it would seem. Maybe for the cloning process. > My radio is the 2 & 6 meter model. The Wouxun driver doesn't support 6 meters. > One thing it says is that I have an error on line 74, and I looked at that > with Libra Office and couldn't find any problem. Line 74 of what? Line 74 of the "wouxun.py" driver is a blank line. Attach the debug.log file. > But it leaves out a local repeater channel that normally goes right into a > Baofeng with Chirp, and it also left out the 6 meter channels I put in. The driver doesn't support 6 meters. What frequency didn't go in? > The channel numbers are there, but no values in the fields. Without seeing the debug.log file, I would say your radio isn't supported, or at the very minimum the channels being entered are out-of-range for the driver (136-175 MHz and 216-520 MHz) > If anyone has any ideas, or can look over my CSV file, I would much > appreciate it. Send me the CSV file, the debug.log file and your downloaded CHIRP Radio Images (*,img) file. > > Thanks. > > Glenn Jim _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
