On Sun, Aug 23, 2020 at 2:56 PM robert moore via chirp_users <[email protected]> wrote: > > Hello all, > I have been using chirp for a few years now to program my baofeng UV-5R > handhelds.I have just picked up a new Leixen VV-898. All of the channels and > settings on my Baofeng are the exact same ones that i want to program in to > my new Leixen. Is there a way to transfer the information from the Baofeng to > the Leixen using chirp? thanks > > Robert/ KM4ORN
Robert, The first thing you need to do is to make sure CHIRP can even program your VV-898. Leixen has changed the radio since the original CHIRP support was created and may have broken it (according to some open issues). If CHIRP does program your VV-898 OK, then all you need to do is import a saved CHIRP Radio Images (*.img) file from your UV-5R into a tab from your VV-898. I use a UV-5R image as the master from programming all of my CHIRP supported dual-band radios. A more detailed explanation can be found here. https://baofengtech.com/CHIRPImport Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
