Ensures a strong, uninterrupted signal across the wire. Considering it's the same circuit for hand-mikes in a lot of cases, this makes sense to me. ------------------------------------------- Matthew Poletiek 303.810.9082 [email protected] www.matthewpoletiek.com
On Tue, Apr 6, 2021 at 5:35 PM Tony Ling <[email protected]> wrote: > > As an aside, what is the basis for this 'radio at maximum volume', 'no active > channel' advice based on. > It sounds bizarre to me as a hardware guy. > > On Tue, 6 Apr 2021 at 22:53, Nigel A. Gunn G8IFF/W8IFF <[email protected]> > wrote: >> >> Usually /dev/ttyUSB0 unless you already have another serial device already >> plugged in to a USB port. >> Go to file manager and look in /dev/ and see what appears and disappears >> when you plun in and unplug the cable. >> >> >> > On 06/04/2021 17:34 Robert via chirp_users >> > <[email protected]> wrote: >> > >> > >> > Hello, >> > >> > Total noob, here. Taking my exams on Thursday. Got my TIDRADIO UV-5R and >> > the FTDI cable. How can I detect which /dev/tty is being used for the FTDI >> > connection to my radio? I tried /dev/ttyS0 and /dev/ttyUSB0 which resulted >> > in the error 'Radio did not respond'. >> > >> > Kindly, >> > Robert >> > . .. ... ‘...^,^ >> > >> > _______________________________________________ chirp_users mailing list >> > [email protected] >> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message >> > was sent to Nigel Gunn, W8IFF at [email protected] To unsubscribe, send an >> > email to [email protected] >> >> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 >> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www >> http://www.ngunn.net >> _______________________________________________ >> chirp_users mailing list >> [email protected] >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Tony Ling at [email protected] >> To unsubscribe, send an email to >> [email protected] > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Matthew Poletiek at [email protected] > To unsubscribe, send an email to > [email protected] _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
