Jim, Thank you so very much! Jerry KB2GCG
- "Defeat lasts one day, giving up lasts a lifetime." > On Apr 13, 2021, at 10:18 PM, Jim Unroe <[email protected]> wrote: > > On Tue, Apr 13, 2021 at 9:45 PM Jerry s <[email protected]> wrote: >> >> Hi all, >> >> I’m a new user of CHIRP. I hooked my radio to my Mac and had no problems >> reading the config and exporting it to a .csv file. I then updated the .csv >> file as per the attached file. >> >> I’m getting an error saying no channels. >> >> I’ve included the original export to CSV as well as the file I’m trying to >> import (Merged V1) . >> >> Any clue would be appreciated. >> >> Jerry KB2GCG >> > > Problem #1 > > The file is double spaced. In other words there is a blank row between > each data row that needs to be removed. > > Problem #2 > > The Duplex field is populated with "(none)". The correct value for a > simplex channel is nothing. In other words nothing should be between > the commas. > > Problem #3 > > There is no value for TStep in the Location 1 and Location 57 row. > Even if TStep is not used for your radio, it is required to be in the > CSV file. > > Problem #4 > > Required data is missing from the Locatioin 55 and Location 56 rows. > If you want memories 55 and 56 to be empty, leave them out. > > > Repaired CSV file attached. > > JIm KC9HI > <Baofeng Initial Exportf Merged V1.1.csv> > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jerry at [email protected] > To unsubscribe, send an email to > [email protected] _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
