You need to be a member of the dialout group to access the USB port. As you've noticed, the /dev/ttyUSB0 device has the group of dialout. All you need to do is add the second user to the dialout group:
sudo adduser second_user dialout second_user will need to log out & log back in again for this to take effect. > On 09/05/2021 09:23 Roger M0ROJ <[email protected]> wrote: > > > Just installed CHIRP-daily 20210429 to use with my Yaesu FTM3207D > (FTM-3200D on menu). > > When connecting the radio to the laptop (Linux Ubuntu 20.04) and > starting CLONE I keep on receiving an error message errno-13 regardless > of which ttysx I select. It also tells me permission denied. And so no > connection made. > > Which permission needs changing and how please? There's no provision for > that within the CHIRP software, that I can see. > > If its a Linux permission for the software (which I doubt), then why > does the CHIRP software function in other respects? > > Help would be appreciated, please? > > Thanks and 73, > > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Nigel Gunn, W8IFF at [email protected] > To unsubscribe, send an email to > [email protected] Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www http://www.ngunn.net _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
