Thanks again, Nigel. I’ve spent too much time on this already and have decided to go with RT Systems. Chirps documentation isn’t too thorough and so better suited to those with more time on their hands: “..... better at writing code and adding new features than writing documentation “ Thanks again & 73.
> On 10 May 2021, at 16:22, Nigel A. Gunn G8IFF/W8IFF <[email protected]> wrote: > > I would guess that you're using a cable who's USB/SERIAL chip isn't > recognised by Ubuntu. What chip is in the cable? > > >> On 10/05/2021 10:54 Roger Reeves M0ROJ <[email protected]> wrote: >> >> >> Still having problems getting my Yaesu FTM-3207D to connect with >> CHIRP-daily, using Ubuntu Linux 20.04. >> The connection dialogue does not specifically show this radio, so I use the >> nearest selection FTM-3200D. >> Then when selecting the Port type and number, it only offers serial ports >> /dev/ttyS0 thru 31, and no USB ports. >> All thoughts and help greatly appreciated? >> Many thanks and 73, >> >> _______________________________________________ chirp_users mailing list >> [email protected] >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was >> sent to Nigel Gunn, W8IFF at [email protected] To unsubscribe, send an email >> to [email protected] > > Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www > http://www.ngunn.net _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
