More on this. I've just tried to save the TX frequencies by setting a split. When I re-opened the file, all the settings were set back to "off".
On 5/31/2021 2:42 PM, Steve Horning wrote: > Interesting. My the programming in CHIRP for my UV-5R stores/saves the > offsets, but CHIRP is not "doing the math" or storing/saving the > offsets with the GT-5R. > > From what I'm seeing, it's on the software side, not the radio side. > After downloading the GT-5R's memory after a complete reset, I enter > programming info for the radio, save it, close and reopen the file, > and the offset field is set to "off". > > > On 5/31/2021 2:00 PM, [email protected] wrote: >> CHIRP lets the user enter the RX and TX frequencies as an RX >> frequency, shift direction and offset, but then CHIRP does the math in >> the background to determine the TX frequency. It is the RX frequency >> and TX frequency that CHIRP stores in the CHIRP Radio Images (*.img) >> file to be sent to the radio in that format because that is what the >> radio requires. -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
