This sounds like cable/radio interface. Many radios (or is it just Baofeng) have issues with the connector into the radio. Press it into the radio harder and see if that helps.
Joe Pizzi KI5LST On 6/4/2021 2:13 PM, Richard K Parrish wrote: > CHIRP now recognizes Port. > > When I try to write to the radio I get the following: > > Failed to communicate with the radio: Radio did not ack block 1. > > What is the sequence for starting the download? Do I hold any buttons while > powering up? > > -----Original Message----- > From: [email protected] > <[email protected]> On Behalf Of Jim Unroe > Sent: Friday, June 4, 2021 12:16 PM > To: Discussion of CHIRP <[email protected]> > Subject: Re: [chirp_users] Can't find Com Ports on Windows 10 > > On Fri, Jun 4, 2021 at 11:22 AM Joe Pizzi <[email protected]> wrote: >> Just change where chirp is attempting to access the radio. >> >> Unless there's a different reason to change the port number. In my > experience, changing the USB port that you're plugged into is the only way > to change the assignment. >> Joe Pizzi >> KI5LST >> > This is one of those "if you have to ask how to change it, you probably > ought to leave it alone" situations. But on the "Port Settings" tab of the > device in Device Manager that you want to edit you would choose the > [Advanced] button which would bring up a panel that would allow you to > adjust the COM Port Number. But you would only be able to choose COM3 if > COM3 is still available. If COM3 has already been assigned to another > device, then you would not be able to choose it. You would have to change > the other device's COM port from COM3 to another available COM port to make > COM3 available for your programming cable. > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Richard K Parrish at [email protected] To > unsubscribe, send an email to [email protected] > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Pizzi at [email protected] > To unsubscribe, send an email to > [email protected] -- Joe Pizzi _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
