Please read previous posts. This get's asked and answered nearly every day.
> On 06/06/2021 23:01 Gerald Stein <[email protected]> wrote: > > > I’m new to Chirp software. The equipment I’m using is a Yaesu FT 60 and a > windows 10 laptop. I acquired the cable sometime ago, but haven’t used it > until recently. The build I am using is the most recent available. Here’s the > problem: I connected the radio to the laptop and uploaded the radio’s > contents without problem. I made some changes to the repeaters listed, saved > the changes, and then tried to download them back to the radio. The download > started normally, but quickly the following error message appeared: “failed > to communicate with radio: radio did not respond.” Any suggestions? > > Thanks and advance for your efforts. > > Jerry > NV7GS > +++++ > Give a person a fish and you feed them for a day. Teach a person to use the > Internet and they won't bother you for weeks, months, maybe years. > > ~Unknown > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Nigel Gunn, W8IFF at [email protected] > To unsubscribe, send an email to > [email protected] Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www http://www.ngunn.net _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
